High Frequency Excavator Hydraulic Ground Hole Drilling Machines

High frequency excavator hydraulic ground hole drilling machines

ProductTypeDS-20Chassislength(mm)4000Trackwidth(mm)600Overallheight(M)3.3Machineweight(t)19-21Maximumdrillingdepth(M)20Drillingdiameter(mm)500-1800Engineratedpower(KW/rpm)126KW-151KWMaximumtorqueofpowerhead(N.m)40000-80000(optionl)Powerheadspeedrpm10-60PowerheadcanbecustomizedYESDrillmast±5Pitchangle4Maximumtravelspeedofchassis(KM/h)4Maximumcreepdegreeofchassis30Maximumtraveltorque(N.m)25000-33000Workingstatewidth(mm)2600Transportstatuswidth(mm)2600Transportstatusheight(mm)3300

Shandong DingLi ConstructionMachinery Co., Ltd. is located in the south of Shandong Province, Mozi hometown - Tengzhou. Companies specializing in the production of crawler rotary drilling rig, wheeled rotary drilling rig and diesel hammer, photovoltaic piling machines and other construction machinery.

1, ground hole drilling machines to reach the destination, finishing the work site, the rotary drill drill pipe put up and install the drill.

2,in the hole at the adjustment of the drill pipe vertical, put down the shovel, began drilling work.

ground hole drilling machines Precautions

1, ground hole drilling machines through the swing lever on the drill pipe around the vertical adjustment, the need to operate the swing lever operation bar, can not be pushed directly to the bit, otherwise the fixed plate will be broke

2, ground hole drilling machines the cylinder pressurized, if the geological hard need to slow pressure, continuous excessive pressure, will make the oil tank oil or bending.

3, ground hole drilling machines often check the drill pipe outside the mouth of the wire rope screws, if loose, to both the top and below the screws, otherwise it will cause the rope break.

4, ground hole drilling machines in the rejection of soil when the turn to slow, too fast instability, likely to cause damage to the steering gear or other parts damage.

Maintenance:
1. Check whether the oil quantity is sufficient, make sure the oil quality is normal.
2. Check whether the gear oil of each reducer is sufficient, make sure the oil quality is normal.
3. Check whether there is oil leakage phenomenon, tighten the loose hose.
4. Check whether the lifting device is flexible and whether the internal butter is contaminated.
5. Check whether there are cracks, rust, out of soldering and other damage in the frame structure, tighten bolts.
6. Check the electrical wire, sensor, operation button handle and other working conditions.
7. Check whether the main and auxiliary wire rope has broken, and its connection is safe and reliable, and whether the strength of pressure rope equipment is sufficient.
8. Whether all transmission parts are fastened.
9. The engine hydraulic system will preheat for 5-20 minutes in advance, according to different climate, and check whether the instrument is normal.
10. After 100 hours of the first time work, release the Hydraulic Oil, and oil of the radiator, clean and replace the damaged filter, use 3.5 litres of diesel. Inject 160 litres of special hydraulic oil, after clean the tank (Requirements: Oil level must not less than 80% of the level gauge of the fuel tank, when stop the machine.)

FAQ

Q1: Are you a manufacturer?

A: Yes, our company was established in 1995. We are a professional Rotary Drilling Rig Manufacturer and have many years of technological exchange with Xozhou Heavy Industry Group.

Q2: What does your company produce?

A: The main products of our company include Ground Hole Drilling Machine,Crawler Rotary Drilling Rig, Wheeled Rotary Drilling Rig and Diesel Hammer, Photovoltaic Piling Machines and other Construction Machinery, etc.

Q3: How about your delivery time?

A: Normally the delivery time is about 7-15 days. For some special case, we can make it within 2 weeks, whichdepends on different products.

Q4: What methods of payment do you accept?

A: We accept T/T, L/C, D/P, D/A, etc.Of course we can have a discussion for this.