High Quality Aluminum Microchannel Condenser for Car (1R-100T-1000)

1. Braze welding vs expanded tube joint
2. metallic bonding between Micro channel tubes and fin.
3. Off the shell high performing split a/c system was examined in ARI conditions A, Band Cwith two condensers: Micro channel flat plate fin.
4. Condenses had the same volume, face, and air side area.
5. Micro channel condenser performed better and consequently system performed better.
6. Average increase in capacity is 4% and in COP IS 17% improve
7. Charge reduction is 19% for the condenser and 9% for the system.
8. The MCHX has better corrosion resistance
9. The MCHX is built to last
10Area available for heat transfer in micro channel HXItemCondenser typeOperation mediumOperation pressure
( MPa )Application1Φ 16/Φ 9.52/Φ 12.7
Copper tube with aluminium finCold/hot water≤ 1.6Used for combined air handling unit, fan coil etc air conditioning devices2Φ 18/Φ 20
Steel pipe winding with steel sheetSteam≤ 0.2Used for combined air handling unit, fan coil etc air conditioning devices3Φ 16/Φ 9.52/Φ 12.7
Copper tube with aluminium finBrine≤ 1.6Used for heat transfer in cold storage and all kinds of low temperature systems4Φ 9.52/Φ 7.94/Φ 7
Copper tube with aluminium finEthylene glycol≤ 1.6Used of energy recovery and low temperature system devices5Φ 16
Copper tube with aluminium finIce mud≤ 1.6Used for dry operation condition, fresh air dehumidification etc systems6Φ 9.52/Φ 7.94/Φ 7
Copper tube with aluminium finR22≤ 1.9Used for industry and commerce air conditioning system7Φ 9.52/Φ 7.94/Φ 7
Copper tube with aluminium finR407C≤ 1.9Used for industry and commerce air conditioning system8Φ 9.52/Φ 7.94/Φ 7
Copper tube with aluminium finR134a≤ 3.1Used for vehicle and vessel etc transportation devices
Note: for further information please contact me.
Ruby Yang
Mobilehttps://: +86 134 7285 7385