High Quality Coating Thickness Tester ec-770f

FEATURES
Objectof Measuring:This compact gauge can be used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel.
F Probe:The internal probe can work on Magnetic Induction. The probe can automatically detect the Ferrous substrate(e.g. Iron, Steel) and calculate the coating thickness and display it fast.
Display:128*128 dot matrix LCD display, standard menu operations;
Measure Mode: single and continuous available;
Two group mode: direct (DIR) and general(GEN), readings will be lost when power off in DIR mode, and not be lost in GEN mode. 80 readings can be stored for each group;
Calibration:Zero point calibration and multi-point calibration(up to 4points) for each group;
Data Management: User can recall, delete specified readings, or delete group readings;
Statistics display:Simultaneously display Measuring Value,mean, minimum, maximum and standard deviation;
Alarm: User can set high or low limit alarm for each group;
Power Save: Power off automatically;
PC Connectable: USB interface to data transmission;Download readings via PC with EasyCoating Software.SPECIFICATIONS
1.Measuring principle: Magnetic Induction (F-probe);
2.Measuring range: 0to 1300um (0 to 51.2mils);
3.Accuracy: ±(3% of readings+2um);
± (3% of readings+0.078mils);
4.Resolution: 0um~999um (1um), 1000um~1300um (0.01mm);
0mils~39.39mils (0.01mils), 39.4mils~51.2mils (0.1mils);
5.Calibration: One to four point calibration, zero calibration;
6.Data Group: One direct group (readings not be stored to memory), four general group (readings can be stored), and each group have individual statistics, alarm settings and calibration;
7.Statistics: No. of readings, mean, minimum, maximum and standard deviation;
8.Units: um, mm and mils;
9.Alarm: User can set the high/low alarm, and alarm icon displayed on LCD when over the limit;
10.Minimum curvature radius: convex 1.5mm(59mils) and concave 25mm(984mils);
11.Minimum measuring size: Diameter 6mm(236mils);
12.Minimum thickness of substrate: F-probe: 0.5mm(0.02");
13.Computer interface: Download data via USB interface;
14.Power supply: Two 1.5v AAA battery;
15. Operation temperature: 0ºCto 40ºC(32ºFto 104ºF);
16. Storage temperature: -20ºCto 70ºC(-4ºFto 158ºF);
17. Size: 110mm*53mm*24mm (4.33"*2.09"*0.94");
18. Weight: 92g (3.24oz);
Welcome your enquiry! Stephan:Tel: +86 755-8527075213128942538