fiberglass chopped strand mat powder binderabout CSM(CSMEP&CSMEE)1.Powder Chopped Strand Mat(CSMEP)are compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. Powder Chopped Strand Mats are available with width range of 50mm~3120mm. The products are available with different wet-out and break up speeds, depending on the requirements of customers. The products are most widely used in hand lay-up and can also be used in filament winding, compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, bathroom equipment, automotive parts and cooling towers.2.Emulsion Chopped Strand Mats(CSMEE)are compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. Powder Chopped Strand Mats are available with width range of 50mm~3120mm. The products are available with different wet-out and break up speeds, depending on the requirements of customers. The products are most widely used in hand lay-up and can also be used in filament winding, compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, bathroom equipment, automotive parts and cooling towers.Compatible Resins and Application:
Powder & Emulsion Chopped Strand Mats are compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. Powder Chopped Strand Mats are available with width range of 50mm~3120mm. The products are available with different wet-out and break up speeds, depending on the requirements of customers. The products are most widely used in hand lay-up and can also be used in filament winding, compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, bathroom equipment, automotive parts and cooling towers.
Spec(g/sqm)
Width(mm)
Area Weight(g/m2)
Moisture Content
Combustible Content(%)
CSME100g/m2
(50~3120) +-5
100+-10%
<=0.20%
8.0~9.8
CSME125g/m2
(50~3120) +-5
120+-10%
<=0.20%
8.0~9.8
CSME200g/m2
(50~3120) +-5
200+-10%
<=0.20%
3.6~4.5
CSME225g/m2
(50~3120) +-5
225+-10%
<=0.20%
3.0~5.0
CSME300g/m2
(50~3120) +-5
300+-10%
<=0.20%
3.0~5.0
CSME375g/m2
(50~3120) +-5
375+-10%
<=0.20%
3.0~5.0
CSME450g/m2
(50~3120) +-5
450+-10%
<=0.20%
3.0~5.0
CSME600g/m2
(50~3120) +-5
600+-10%
<=0.20%
3.0~5.0
CSMEP900g/m2
(50~3120) +-5
900+-10%
<=0.20%
3.0~5.0