High Quality Incremental Rotary Encoder Arduino

ProductDescription
RotaryEncoderSeries
Rotaryencodersarehightechsensorswithacombinationofoptical,mechanical,electrical
precisiontechnologytomeasuredisplacementandangle.
MainFeatures:
smallsize,varioustypes,completefunction,highfrequencyresponse,highresolution,low
powerconsumption,stableperformance,reliableandlonglife.
Specification
CHB38H seriesModelCHB38H-N/E/F/L-100,200,360,400,600,800,1000,1024,2000,2500Main sizeExternal diameter:φ38mm; Shaft diameter:φ8mmWorking powerDC5V-24V
Output mode N: Open-collector output (NPN)E: Voltage outputF: Complementary outputL: Drive outputPulse output100,200,360,400,600,800,1000,1024,2000,2500Output phase A B Z or A B Z -A -B -ZTermination modeG:Side entry cable
Working principle
Outline size
Precaution
1). This product is consists of high-precision parts, be sure to handle with utmost care, do not drop.
2). When mounting this product, if decentering tolerance or declination tolerance is too big, may
result in reduce its working life.
3). Make sure that the product is free from impact, vibration, corrosion, high magnetic field, high
temperature, high humidity and acid-alkaline environment.
4). Unnecessary pulses are output when turn ON or OFF, be sure to turn ON the peripheral devices
connect to the encoder 0.5S after turning ON the encoder, and turn OFF the peripheral devices
0.5S before turning OFF the encoder.
5). After wiring the cable with the encoder securely, do not pull the cable with 29.4N or more.
6). If it is near to high voltage line or power supply cable, please use cable tube to cover the wires.
7). When wiring the cable, be sure no short connect between each cable, do not make mistakes in the
wiring, otherwise the encoder may be damaged.
It is suggest to make proper insulation for the cable which is not required for connection
9. Precaution
8). Shielded cable should be proper grounded.
9). Do not disassembly the product