High Speed Centrifugal Spray Dryer

Descriptions:
Spray drying is the widest used process in the liquid forming process and drying industry. The drying technology is most suitable for powder, particle products from solution, emulsion, suspension liquid and pumpable paste materials.Working Principle:
After filtering and heating, the air goes into the air distributor on the top of the dryer. The hot air goes into the drying room uniformlyin spiral form. By passing through high-speed centrifugal atomizer on top of the tower, the material liquid rotates and is sprayed into the extremely fine mist liquid beads. Through the contact with the hot air, the materials can be dried into final products in short time. The final products will be discharged continuously from the bottom of the drying tower and from the cyclone separator. The waste gas will be discharged from exhaust fan.
Features:
1. Quick drying speed; after atomizing of the material liquid, the surface area will be increased greatly.
2. Especially suitable for drying heat sensitive materials.
3. Final products are of good uniformity, mobility, and solubleness as well as high purity and good quality.
4. Simple production procedures, easy operation and control.Technical data: DATA LPG525501001502005001000Inlet temp. (ºC) 130-300Outlet temp. (ºC) 70-90Evaporation (kg/h)3-718-2535-5075-100120-150170-210400-500800-1000Transmission modeCompressed air Electric driveSpeed (rpm)2500018000-2700015000-1800012000-15000Heat sourcePower supplySteam + power supplySteam + Power supply or stoveHot air stoveTransmission power (kw)4.2141423294376109Heating power (kW)183648728496144Dust recovery rate ≥97%Diameter (m)1.21.92.22.562.963.365.27.6Height (m)2.23.64.65.46.379.212.4
Company Profile:
Changzhou Aokai Drying Equipment Co., Ltd. was established in 2004, and is specialized in the design, manufacturing and development of the drying, calcination, cooling, crushing, mixing and granulating equipment.
The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.Q&A:
1. Q: Please describe your warranty period.
A:15 monthsafter the equipment is arrived at the destination portor 12 monthsafter the installation and commissioning of the equipment, whichever comes first.2. Q: Do you provide on-site installation and commissioning?
A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.3. Q: How about the cost of on-site installation and commissioning guidance?
A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.4. Q: Are you a factory or a trading company?
A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing.