Ceramic Fiber ModuleDescriptionCT ceramic fibre module adopt high quality ceramic fibre blanket, which is made up to compression module after folding, compression, packingmodule can choose kinds combination of anchor and furnace body, installation method is so simple that quicken the speed of furnace lining construction largelyAfter installation, the bandaging are cut and the modules and so to form an integrated insulating lining.The anchor system in remote from module hot face, maintaining the metal components at a relatively low temperature
FeaturesThe anchorage on the back allows for both in-line and parquet installation.The decompression of the blanket folds gives tightly sealed intermodular joints with both configurationsThe resilient blanket is resistant to mechanical damageLow thermal conductivity give high thermal efficiencyTotal resistance to thermal shockNo drying or curing required - so available for production operation immediately after installationThe anchor is remote form the module hot face
Typical ApplicationsHeat treatment: annealing furnace, tempering furnace, soaking pit, etcCeramic: white ware, sanitary ware and brick firing tunnel and intermitted kiln.Iron and Steel: Transfer ladle lids, soaking pit covers, reheating furnace, continuous annealing furnaces, lift-off furnacesPetrochemical: ethylene pyrolysis furnace, reformers, atmosphere reduced pressure furnace, ductwork pyrolysis heatersAluminium: Soaking pits and covers, bale out furnaces, homogenizing and ductworkUtilities: waste heat recovery units, combustion chambers and boiler ductwork
Data sheet TypeCT-1000CT-1260CT-1360CT-1430CT-1500CT-1600Classification temperature oC110012601360143015001600Density(kg/m3)Density170,190,210170,190,200Product picture
Project