Introduction:
The line is the special pultrusion machine used to produce FRP rebar with different specifications. It can finish distributing roving, impregnation, pre-molding, winding, heating and curing, unwinding, fix-length cutting and pile up automatically.FRP rebar machine is made by fiberglass yarn racks, resin tanks and pre-formation, winding equipment, temperature control system, traction equipment, auto-cutting, resin recycling, and control cabinet.1) Fiberglass yarn rocks
It is used fro set the fiberglass yarn and control the way of yarn, keep the yarn tie a knot, make the manufacture goes well.2) Resin tanks and pre-formation:
They can make the fiberglass yarn have a totally impregnation and control the way of the yarn's working, making a preformation for the products.3) The winding machine can control the distance and depth of screw, it drived by two 1.5kw motors.4) The temperature control system can use control the heat temperature, make the rebar have totally solidify, with 28kw power.5) The traction equipment can pull our product in a special temperature, with a 5.5kw power motor.6) The auto cutting equipment can cut into short length based on the needs. with a 1.2kw power motor.7) The control cabinet is monitor to the total running of the rebar/rock bolts machine.
Technical parameter:
Working voltage: 380V/50HzTotal power: ≈30KWAir pressure: 0.4-0.6MpaCenter height of the line: 1000mmDimension: ≈20000mm(L)x1850mm(W)x1450mm(H)
Feature:
1)fouranchorrodmachineratedtotalpower25KW.Thefouranchoristheothercompany,arockformingmachine(aboltformingmachineratedpower32KW)0.78times.
2)highproductionefficiency,4000-6000metersperday.Productionefficiencyis3timesmorethanothercompaniesarockbolt.3)energysaving,powerconsumptionpermeterisonly0.06degrees.Energyefficiencyis3timesmorethanothercompaniesarockbolt.4)thequalityoftheproducts;anyphthalateunsaturatedpolyesterresinandrovingproductsmeettherequirementsofMT/T1061-2008.Inparticular,theyarnisfullofyarn.5)35mmdiameterspecificationsfortheproductionof8mm.Cuttinglength.
Advantage:1)boltmachinecanproducefoursamediameter,withthesamepitch,withthesamelengthofthewholescrewthreadglass.2) highefficiency;
Productionofabout3.2metersperminute,morethan4000metersperday.6000mmdiameterofthefollowing12metersperdaycanbeproduced.3)energysaving
Powerconsumptionperhourislessthan11degrees.Thepowerconsumptionislessthan0.07metersperanchor,atthesametimeduetomultipleproductionequipment.Thedeviceadoptsdoublelayerheatinsulationclosedoven,whichgreatlyimprovestheutilizationofenergy.4)lowcost,highefficiency,savingrawmaterials,lowproductioncost,operationandmaintenance;5)advancedmoldingtechnology,moldingprocess,tooling;