Home Appliance Cheap 16inch Cross Base Electrical Cooling Stand Pedestal Fan (FS40-608) for Italy an

TESGO FAN
IT'S COOL TO BE SO COLDHome Appliance Cheap 16inch Cross base Electrical Stand Fan
Foshan Shunde YuanFeng Electrical Appliance Co.,Ltd. was located in the world famous manufacturing center of household appliances -Shunde City, Guangdong Province.
Buy electric fan,our factory isthe best choice for you!
Ourmain products as follow:
1.Stand Fan
2.Table Fan
3.Wall Fan
4.Box Fan
5.Tower Fan
6.Orbit Fan
7.Industrial Fan
Product Name:16inch stand fanModel No:FS40-608Voltage:220VFrequency:50HzPower:40WMotor:66*12 Aluminum Motor or Copper MotorGrill:Mesh GrillBlades:3 pp bladesPlug:two round PlugColor:Grey or according the orderbase:Cross baseBody:New PP materialHeight:130cm

High quality because of attention to detail

1* Our factory machine using automatic production lines, the motors are more reliability and high-quality .

2*Low heat during operation, silent for along time overload running, not hot, put an end to rust.

3*Compact design,beautiful shape and artful design,and also easy to take with.

4 *Strong wind ,big motor,faster speed and 5speed natural wind grade choices.

5*Security smart,safty switch and over temperature protection keep it more safty.

6* Low power ,environment friendly.

ASSEMBLY INSTRUCTIONS
base AND PILLAR ASSMBLY
1.Take our base and pillar part from the carton.
2.Revolve the height adjustor anti-clock wisely out,draw the steel tube out of the pillar.Then revolve the height adjustor clock-wisely to fasten it.
3.Locate the pillar proper into the base,take the screw nut from the plastic bag and fit if to the pillar from the bottom of the base and fasten it.
4.Adjust the height adjustor to meet you requirement of the height of the wind sending.
FAN BODY AND COLUMN ASSEMBLE
Unscrew the fixing knob on the back of the bottom of fan body,emptied the hole in the bottom of fan body,put extension column into the hole of the fan body,then tighten the fixing knob.
BLADE AND GRILLES ASSEMBLY
1.Remove the spinner and the plastic nut from the front side of the motor shaft then tighten the plastic nut.
2.Discard PVC sleeve on shaft.Insert the blade into shaft,made sure the stopper pin is clipped in to the groove of theblade.Screw the spinner counter clockwise to tighten the blades.
3.Hold the front guard to make sure that the trade mark is level and that the front guard are centered over the rearguard.Then push all the safety clips firmly into place.
OPERATION INSTRUCTION
Speed control please use "speed "switch to turn on/off the fan and adjust the speed by push the swich to number indicating. 0-off 1-low 2-medium 3-high
OSCILIATION CONTROL
To make the fan oscillating,pres the oscillation knob located on the top of the motor housing.To get the directional airflow,press the oscillating knob.
TILTING CONTROL
Unscrew the tilting knob,adjust the fan head to the desirable angle by holding the fan head,then tighten the knob.MAINTENANCE INSTRUCTIONS
The fan requires little maintenance.Do not try to fix it by yourself,refer it to qualified service personnel if service is required.
1.Before cleaning and assembling,do not plug the pins into the socket.
2.To ensure adequate air circulation to the motor,keep vents at the rear of the motor housing room dust,fluff and etc,A vacuum cleaner can not be used to clean these vents before unplug.Do not disassemble the fan to remove fluff.
3.Please wipe the exterior ports with a soft cloth soaking a mild detergent.Do not use any abrasive detergent or solvents to avoid scratching the surface.
4.Do not allow water or any other liquid in to the motor housing or interior parts.
5.If the power cord is damaged,it is strongly recommended to request a specialist to handle.
FAQ1. If Iam interested in your products, how can Icontact you?Re: You can leave the message below. It will be better if you inform us your online tools, like QQ, skype, wechat, whatapps... and so on. We will reply you a.s.a.p.

2. Can Iget the samples for check first?

Re: Of course. Samples can be provided at any time. But the buyer must pay for the cost and freight. We can caculate the freight in avdance, or you can inform us your consignee account number of DHL, FEDEX, UPS, TNT... and so on.

3. How can Ipay for the fee?

Re: We accept US dollar or RMB. For small amount, we recommend Paypal or Western Union or bank account. You can contact us to get our account.

4. How long do you make the samples?

Re: 1~7 days after we receive the payment. once send out, we will inform you the tracking no. at once..

5. Do you have the stock or can Iplace atrial order with small quantity?Re: We often make the products according to the order. so we have no or small stock, but we accept trial order. Just contact us!