Horizontal Cantilever Centrifugal Casting Equipment for Pipe

Feature
The host consists of the base, turntable, adjustable-speedmotor, bearing pedestal, main axis, driving gear and ejector system.
Hostis the core component ofcantilever centrifugalcasting machine, which makes theturntablerotate. It can realize the centrifugal casting.
The mold is fixed on the turn-plate. The main axle is stepless speed regulation so that the equipment can be able to meet technical requirements of casting with different diameter.
Hydraulic ejectormechanism comprises hydraulic unit, ejector oil cylinder and ejector rod. The ejector oil cylinder drives the ejector rod put out of the casting. The ejector rod is in the middle of main axis,
The cooling system includes two parts. The one is mold and casting cooling, the other is main shaft bearing cooling. In order to improve the work environment, the water of mold and casting cooling system will be recycling by channel.
AC variable frequency motor drives the mold turntable rotate. It has widely speed range. The main axis is stepless speed regulation so that the equipment can be able to meet technical requirements of casting with different diameter.
The control unit makes up with PLC, HMI touch screen, Variable-frequency drive, control cabinet and low voltage electrical components.
Equipped with safety protection cover itensures safety in production.
Technical specification
nameofparameter:
parameter values
Casting maximum diameter
Ø800 mm
Casting minimum length
Ø500 mm
Casting maximum length
600 mm
The maximum load(die+mold)
1 Tons
Main machine power of motor
22Kw
Speed of mold
0~1000 rpm
Hydraulic pump motor power
4 Kw
Ejector force
100 KN
Ejector stroke
300 mm