Horizontal Cantilever Centrifugal Casting Equipment for Sleeves

Our Customer
The castings produced by our machine
Summary
The structure ofcantilever centrifugalcastingmachine is horizontal. It is made up of engine,electriccontrolsystem, water cooling system, hydraulicejector mechanism and Safety protection cover. It can be widely used in largediametersleeve and cylindercastingsproduction.Feature
1 The engineconsists of the base, turntable, adjustable-speedmotor, bearing pedestal, main axis, driving gear and ejector system.
2 Engineis the core component ofcantilever centrifugalcasting machine.The enginemakes theturntablerotate,which completes the centrifugal casting.The mold is fixed on the turntable. The main axle's speed is stepless adjustable.So it meets technical requirements of casting with different diameter.
3 Hydraulic ejectormechanism comprises hydraulic unit, ejector oil cylinder and ejector rod. The ejector oil cylinder drives the ejector rod put out of the casting. The ejector rod is in the middle of main axis.
4 The cooling system includes two parts. The one is mold and casting cooling, another is main shaft bearing cooling. In order to improve the work environment, the water of mold and casting cooling system will be recycling by channel.
5 The mold rotates with turntable driving by AC variable frequency motor.The frequency motor has widely speed range and smooth running.So it meets production process with different castings.
6 Electric control systemconsists of PLC,HMI,variable-frequency drive,control cabinet and low voltage electrical components.
7 The engine equips safety protection cover, whichensures safety in production.
Main technical parameters
nameofparameter:
parameter values
Casting maximum diameter
Ø800 mm
Casting minimum length
Ø500 mm
Casting maximum length
600 mm
The maximum load(die+mold)
1 Tons
Main machine power of motor
22Kw
Speed of mold
0~1000 rpm
Hydraulic pump motor power
4 Kw
Ejector force
100 KN
Ejector stroke
300 mm