Laminating hot press is fit for the furniture factory or panel secondary processing plant, which can make lamination for furniture panel,building partition, wooden door or laminate all kinds of decorative material on man-made board. It also can be used for drying or leveling veneer.Main features:
1. Adopt solid drilled conduction board, warming up faster, uniform thermal conductivity, and energy consumption lower.
2. Omron or Schneider main electric components, it is stable and durable.
3. Hawe valve from German for auto-open hydraulic valve, high holding pressure, reliable performance, less human factors.
4. Piston mode for cylinder. Grind, plate hard chromium on the surface and polish piston
after heat treatment. It is durable and high precision. Adopt special seal-rings for reliability and durability.
5. Mylar for in and out of the hose, external spoke flexible reinforced, using cycle is long and difficult to damage.
6. Configure pull E-stop switch, temperature secondary protection equipment.User can choose the following controlling way:
1.electrical button control
2.PLC-HMI programmed control
Technical parameter:
ModelBY214X12/16(3)H1RCBY215X9/16(3)H1RCTotal pressure1600kN1600kNWorking layers33Unit pressure3.4kgf/cm23.6kgf/cm2Platen No.& Size4-3600x1300x42mm4-3000x1500x42mmOpening120mm120mmCylinder No.& Diameter10-φ85mm10-φ85mmHeating wayelectric heated with thermal oilelectric heated with thermal oilInstalled power77.5kw77.5kwClosed speed24mm/s24mm/s