Hot Sales Stone&Rock Hammer Crusher

Hammer crusherfeatures&advantages:

1. High capacity and low power consumption;

2. Uniform particle size with high crushing and crushing ratio;

3. Simple structure;Easy operation

4. Low investment.
5. Perfect services.Hammer crusherworking principle:

Hammer crushermainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper part and lower part, which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out.The rotors consist of turn plates, pin shafts, and hammers which are grouped regularly in the main shaft. The main unit drives the main shaft through the motor and triangle belts, which, in turn, rotates the rollers. Large materials entering the crusher through the feed inlet are firstly crushed by the high-speed hammers, and then thrown fiercely to the support iron for further crushing.Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement. To avoid the plugging of the crusher, the proportion of water for the crushing materials is no more than 20%.
FAQ:

1.What are advantages of your hammer crusher?

-The main advantage of ourlimestone hammer crusherover other kinds of mills is that you can grind a friable or crystalline material to 3mm average particle size and classify in a very narrow particle size range at the same time. There are no moving parts to wear out or generate heat in our mill and no screens to plug or be punctured.

2.Can you guarantee the quality of your hammer crusher?
---We have passed CE&ISO9001:2008, and ourlimestone hammer crusherhave been exported to Eastern Europe, Middle East, Africa, South Asia, Southeast Asia, Oceania, America, etc.

ModelFeeding Size(mm)Product size(mm)Motor
power
(KW)Eccentric
shaft
speed(r/minThe volume of freightPFC120100-200<205587050-90PFC135100-200<2075-9087060-100PFC150100-200<20110-13288090-120PFC180100-200<25150725100-150PFC210100-200<25220725110-180PFC240100-300<25320600160-240