Hybrid Pure Sine Wave Inverter 1-12kw Inbuilt MPPT Controller 40/50AMP

Hybrid Pure Sine Wave Inverter 1-12Kw inbuilt mppt controller 40/50Amp
1: Pure sine wave output (THD< 3%)
2: Build in MPPT solar charge controller 40A or 50A
3: Inverter mode and solar inverter mode for your select by switch
Key Features
1: Professional off grid solar system solution, which is combination of big power inverter and solar controller
2: Working modes switch automatically-Ac Grid bypass mode, Inverter Mode, Ac Charging mode,
Solar charging mode
3; Pure Sine Wave output whig matches wave from of AC Grid not matter it on Ac grid mode or inverter
Mode, workable on inductive load
4: Remote control&RS232 communication port
5: Power Saver mode
6: Four stages smart charing, charging current adjusted automatically
7: DIP Switch optional: Selectable charging voltage for various battery type
8: Manual control input&output breakers
9: AC Grid priority&battery priority working mode are selectable
10: AC Grid mode: AC Bypass supplies load when AC is normal, battery invert AC Supplies load when
AC is off
11; Battery priority: Battery invert supplies load when battery get full-charged; AC Bypass supplies load
When battery low and at the meantime battery get charged from solar controller. It transfers back to
Battery invert mode when battery gel full charged. It males full use of solar energy and saves electricity.ModelCS 1000CS 1500CS 2000CS 3000Gerneral specificationNominal Input Voltage120VAC/230VACLow voltage trip85V±4%/184±4%Low voltage re engage95V±4%/194±4%high voltage trip135V±4%/253±4%high voltage re engage127V±4%/243±4%Nominal input Frequency50Hz or 60Hz (auto sensing)Low freq trip47Hz for 50Hz,57Hz for 60HzHigh freq trip55Hz for 50Hz,65Hz for 60HzAC outputpower1000W1500W2000W3000WVoltage120VAC/230VACFrequency50Hz±0.3HzWaveformpure sine waveCrest Power3 times of ratingsDC inputBattery voltage12V/24V*2 for 24V modelAC charger modeSolar inverter mode(battery power priorty mode)Position 1~6Position 7Position 8Position 9Low battery trip(12V)10V11V10.5V10Vhigh battery trip(12V)15.5V14V13.5V13VAC chargerInput Voltage Range90~135VAC/164~243VACCharge current 12V model35A45A65A75Acharge current 24V model20A25A35A40Asolar chargerPV Input Voltage Range15-30V for 12V ;30-55V for 24VMax.PV open circuit array voltage55VDCCharge currentMPPT 40A/50ABypassbypass without battery connectedYesMax bypass current30ampsbypass over load current35amps:alarmothersLED Display on caseFrom the right to the left LED1 line mode , LED2 inverter mode, LED3 charging mode, LED4 Fully charged,LED5 over heat shutdown,LED6 Overloadedshutdown LED7 Saving ModeLED Display on switch Charging Mode(green lighting),inverter mode(green lighting), Alarm(red lighting)Protections low battery,over charging,over temp,over load, short circuit protectionPhysicalNet Weight(KG)20.822.824.529.1D X W X H(mm)486.4*400*181.2