IGBT AC TIG/DC TIG Pulse/MMA/Plasma Cutter 4 in 1 Welder

INVERTER ACDC TIG/MMA/CUT MACHINE TC164
IGBT advanced double inverter technology
Single phase power supply: 1X220/230/240V50/60Hz Fuse 14.7/20.7A
Light weight.
HF arc start for TIG&CUT, arc force for MMA
2T/4T and pulse control function for TIG
AC/DCTIG suitable for steel, stainless steel, aluminm.
Digital display
Can be with foot controller.
Welding cable 3m+300A holder, welding cable 3m+300A earth clamp, TIG&CUT torch 4m, gas hose 2m.
Over hot and current protection.
Input Voltage: 1x220/230/240V 50/60Hz
Input Power: 4.8KVA
No load voltage: 60~80V(Welding)/ 200V(CUTTING)
Current: 5~160A(Welding)/15~40A(Cutting) Duty cycle: 35%
Current up-slope time: 0~10s Gas post flow time: 1~25s Current down-slope time: 0~10s
SP value (balance): 30~70% AC frequency: 20~100Hz(250Hz)
ModelTC164 AC/DCTC205 AC/DCInputvoltageAC220/230/240V 50HzAC220/230/240V 50HzAC TIGNo load voltage60-80V60-80Vbase Current Adjusting range20-160A20-200AAC balance30-70%30-70%AC square wave frequency20-100Hz20-250HzRated Duty Cycle35%35%DC TIG
Pulse current adjusting range5-160A5-200ARated Duty Cycle35%35%Current down-slope time0~10S0~10Sbase Current Adjusting range5-160A5-200APluse Width Ratio0.1~0.90.1~0.9Pluse Frequency0.5~25Hz0.5~25HzAfter flow time1~25S1~25SArc starting ModeHigh frequency arc strikingHigh frequency arc strikingDC MMANo load voltage60-80V60-80Vbase Current Adjusting range5-160A5-200ARate output current160A200ARated Duty Cycle35%35%CUT(base) Current Adjusting range15-40A15-50ARated Duty Cycle35%35%Max Cutting thickness812Efficiency≥83%≥83%Weight49KG51KGProtection Class of enclosureIP21SIP21SOutline dimensions mm2430x200x290430x200x290AccesorriesTIG welding torch WP-26/Cutting torch WSD-60/
Welding clamp/Welding holder/Gas inlet pipe/
Air pressure Regulator etc