IP55 Waterproof Wall Mounted Cabinet with Circuit Board

WB-OD-H follows the IEC's standardized International Protection Code system for measuing capabilities.The IP Code reflects the degree of protection as "IP" followed by two numbers;
the first digit shows the extent to which enclosures are protected against particles/dust, and protection to others from enclosed hazards.
The second digit indicates the extent of protection against water.We carry IP65 enclosures which offers complete protection against particles/dust, and a strict control of protection against water. Because all of our enclosures strictly observe the standards, you can expect first-rate and competitively-priced outdoor enclosures.
IP65= Enclosures' Characteristics:
Complete protection from dust, oil, and other non-corrosive material
Complete protection from contacting with enclosed equipment
Protection from water, up to water projected by a nozzle against enclosure from any direction
Available in wall-mounted, free standing, trough, and telegraph pole mounting
Silk-screening logo, anodizing, or engraving services are available
Custom with cutouts,insulation, hinges, latches or locksIP55= Enclosures' Characteristics:
Complete protection from dust, oil, and other non-corrosive material
Complete protection from contacting with enclosed equipment
Protection from water, up to water projected by a nozzle against enclosure from any direction
Available in wall-mounted, free standing, trough, and telegraph pole mounting
Silk-screening logo, anodizing, or engraving services are availableOur Weatherproof Enclosures have the solution for products in industrial environments with high demands on safety, durability, reliability and cost saving for the end user.• Safety - tested and approved by third party testing laboratories.
• Durability - materials used give a high durability in tough conditions and environments.
• Reliability - high quality contacts ensure reliability. (IP55 or higher)
• Cost saving - designed for quick and easy installation.• Construction - Body and door/cover are formed from 16 or 18 gauge cold-rolled steel. (1.0/1.2mm)- w/ removable inner door are formed from sheet steel, depth adjustable- Removable inner panel is formed from 14 or 16 gauge galvanized sheet- Grounding and panel mounting hardware provided.
Features
- Lockable front door installed with earthing cable
- Strong double wall type framework
- 19" galvanized/powder coated mounting profile for device installation
- Bottom panel cable entry, can be perfectly fix to floor
- Side louver vented aread for airflow
- Circuit board installed as per customized requirement
- 4 x galvanized rails
- peripheral is optional [ lighting system,smoke alarm,temperature sensor etc..]MAKE TO ORDER service. below size is suggested for choose.
Width: 600 mm
Depth: 450, 600 mm
Height: 4U, 6U ,9U ,12U, 15U, 18U
Standard and Material:
Comply with
ANSI/EIA,RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard and ETSI standard.Surface Finish:Degrease, acid pickling, rust prevention and parkerizing,pure water cleaning, static electricity powder coatingMaterial:SPCC cold rolled steel or Zinc-plated plate or stainless steelThickness:Mounting profile:1.5mm,others: 1.00~1.20 mmIP degree: IP-55 or IP-65Body color:RAL5012(Top cover and base);RAL7035(The others)
Environment conditions:
Temperature: -40°C ~+ 60°C
Relative Humidity: ≤95% (at 40°C)
Atmospheric pressure : 70kPa ~ 106kPaTechnical Specifications:
The protection grade reaches IP55.
Working with wavelength of 850nm, 1310nm and 1550nm.
Pressurization between the frame high voltage protection earth device and the frame: ≥3000V (DC) / 1 minute without any breakdown or flashover.
Insulation resistance between the frame high voltage protection earth device and the frame: ≥20,000M Ω/ 500V (DC).
Each surface of the cabinet can bear a vertical pressure over 980N.
The outermost part of the door can bear a vertical pressure over 200N when the door is open.
The fixing position of cable can bear an axial tensile force 1000N, as well as three times of recyclable torsion of ±90°.
Mechanical durability: No damage for all connectors and adaptors after 500 mating times.