ISO 12127 Clothing and Material Contact Heat Transmission Tester EN 702

ISO 12127 Clothing and Material Contact Heat Transmission Tester EN 702

Introduction:

The contact-heat resistance test device is developed according to the EN702 test standard, and it also meets the requirements of domestic AQ 6103-2007 welder protective gloves contact-heat resistance test standard. The test result can display the contact temperature and start measuring time and the time threshold, its principle is to set the contact temperature, protective fabric in 49 n under pressure measurement of contact heating cylinder at the same time, its temperature is increased from initial temperature 10 ℃, called the threshold, the length of time to evaluate thermal protection performance of protective fabric.

Application:

Safety protection

Standard:

ISO12127-2007Clothing for protection against heat and flame -- Determination of contact heat transmission through protective clothing or constituent materialsEN702Protective clothing. Protection against heat and flame. Test method. Determination of the contact heat transmission through protective clothing or its materials

Specification:

1, Laboratory Flammability Testing Equipment Fire Analyzer for Clothing is consists of a control box and stainless steel test gantry.

2, The sample holder is automatic lifting, lifting speed is 5mm ± 0.2mm/s.

3, The K type sheathed thermocouples, diameter 2mm, temperature measurement accuracy is 0.1 ºC.

4, Heating barrel temperature is higher than 500℃, the contact surface of the sample diameter is 25.2±0.05mm.

5, Barrel heating load weight 49N, is adjustable.

6, Timer scope 0 to 99999s, timing accuracy up to 0.1s.

7, Calorimeter fixed disk diameter is 25mm, thickness 5mm, and assembled with a platinum resistance temperature sensor.

8, Support frame material is nylon 66, diameter 40mm and height 50mm.

9, Specimen diameter should be 80mm.

10, PLC and touch screen for an intelligent control system.

11, PID intelligent temperature control system, automatically collect temperature data.

12, Test data is automatically calculated and stored by the system, the test result can be printed freely.

Product NameISO 12127 Resistance To Contact Heat Test Device for ClothingTest table size 650mm x 350 mm x 650mmPower supply220V 50 / 60Hz, power 800w, can be customizedWeightabout 50 kgAmbient TemperatureOperating25±5℃Gas Supplies requirementPropane and air compressed air

Contact Us: