Industrial Airflow Drying Equipment Sawdust Air Dryer

Airflow Dryer can dry the materials, using the hot wind produced by the hot-blast stove, the machine is applied to the material in dispersed state which contains high moisture humidity, such as the saw dust, grain or straw.
Two driers can be used together for very high moisture, to get big output demand. Airflow dryer is consisted of hot-wind stove, screw feeder, buffer, blower, the pipes and cyclone. The work process is that the air flow is formed through the negative pressure of blower, the materials enter into the pipe through the screw feeder, so that the hot wind and materials mix together, and the moisture is separated from the materials when passing the cyclone.
ModelDL-260ADL-300ADL-350ADH-260DH-350DH-400DH-450DH-500Initial moisture25%-30%25%-30%25%-30%34%-45%35%-45%35%-45%35%-45%35%-45%Fan power4KW7.5KW11KW5.5KW11KW15KW18.5KW22KWDrying Pipe Diamet260MM300MM350MM260MM350MM400MM450MM500MMCyclone diameter780MM900MM1050MM780MM1050MM1200MM1270MM1500MMDimensions9M*2.5M*3M16M*3M*3.2M18M*3M*3.3M18M*3M*3.2M22M*3M*3.5M24M*3M*4.3M27M*3M*4.5M30M*3M*5MFuel Consumption40-50KG/H60-80KG/H80-100KG/H50-60KG/H80-100KG/H100-120KG/H120-150KG/H250-300KG/HDrying Speed180-250KG/H400-500KG/H600-800KG/H250-300KG/H600-800KG/H800-1000KG/H1000-1200KG/H1600-2000KG/HMachine Weight1760KG2660KG3200KG2300KG3460KG4300KG4920KG6500KG
The air flow drier is widely used.The drying strength is large and investment of equipment is saving: the treating amount of pneumatic drier is the largest. The evaporated moisture capacity of equipment manufactured by we will 50-150kg/hr. The volume of equipment is small and the investment is saving. The advantage can not be compared from other drying equipment.The automatic content is high and the quality of product is good: the raw material to be dried is inside the pipe. The dry time is short(only 0.5-2 seconds). So that the automatic can be realized. The raw material can not contact with outer substances.The equipment will be supplied completely and the heat source can be chosen freely: the pneumatic drier will be supplied completely. The basic type consists of filter, heater, feeder, drying pipe, fan and cyclone separator. Customer can install duster and other auxiliary equipment in accordance with practical conditions.The damp raw material through conveyer and heated fresh air enter into the drier at the same time. They are mixed fully. Because the area of heat exchange is large, the purpose of evaporation and dry can be realized in ashort time. The dried finished product is discharged from cyclone separator. Small parts of powder dust can be recovered and used through cyclone separator or bag duster.Air steam drier is quick, continuous and momentary drying equipment having larger in batch and high in heat efficiency. Even though it can suitable for different raw materials drying, but there exists large difference among raw materials, norder to make customers choose their expected drying equipment, we will provide technical consultation and provide installation and arrangement plan.OUR SERVICPre-sale service
1.Our professional and experienced engineer team helps every client to find his most suitable equipment or chose of plant.
2. Any kind of legal logo printing or design are available.
3.Good Quality +Factory Price +Quick Response +Reliable Service, is what we are trying best to offer you.
After you choose:
1. We will make drawing and show you how the pant looks.
2. Every equipment will be checked carefully before packing. Video on machine testing is available.
3. Email you the tracking no., and help to chase the container until it arrives you.
After-sale service
1.We are very glad that customers give us some suggestion for price and products.
2.If you have any question,please contact us freely by E-mail or Telephone.
FAQQ. what is your payment term?
A: T/T 30% down payment, balance to be paid before shipment.
Q: what is your main market?
A: South America, Eastern Europe, Southeast Asia, Africa, Oceania, Eastern Asia
Q: what is your producing time?
A: Producing time depends on that machines you ordered. Usually takes 45 days.
Q: what documents you can offer?
A: We can offer invoice, packing list, contract, instructions, customs declaration, certificate of origin, CE. If client need other documents, specifications, please confirm with service staff.
Q: If equipments have some quality problem, how would you deal with?
A: We will responsible for all the quality problems. We will check the machine to get the problem. If need parts, will send them to you.
Q: how to install the equipments?
A: We send 1-2 engineer (100usd/person/day) to the local plant for helping install and commissioning equipments. To save time, our service stuff will tell you what to prepare in advance. We can also teach the workers to how to use the machines and how to make the products better.Web: www.vangton.com (english)
www.vangton.ru (russian)