Industrial RO Membrane 8365 Lp Series

Industrial RO membrane 8365 LP seriesActive Area, 365(33.9) Ft2 (m2)Removal rate, above 99.5%Size, 101.6*20.32cmWater production rate, 11000GPDTesting pressure, 150PSITest temperature, 25ºCPacking detail, 4PCS/CTNPacking size, 110*28*28cmGross weight, 19KGSSource water TDS≤2000ppm
Working Theory: Physical filtering, Reverse OsmosisInstallation InstructionsUnscrew the nut on the membrane shell cover at the inlet water connection end, take out the inlet water pipe, then use the membrane shell wrench to loose the membrane shell cover. Take the RO membrane from its packaging, put the end of the membrane with 2 O-rings into the RO membrane shell (See The following Diagram ) and push it in, finally screw the membrane shell cover back on, and tighten it with membrane shell wrench, put the inlet water pipe back into the inlet water connector and screw the nut tightly, then push the membrane shell card into the large single clip.
Direction For Use1. When installing the RO membrane, you should pay attention to the direction of the membrane;
2. When installing the RO membrane, you should first make sure that one end of the membrane has 2 O-rings;
3. When installing, be sure to put the end with the O-ring into the end of the membrane shell with the pure water connection, for correct installation you need only a little force to put the RO membrane into the membrane shell, if you encounter too much resistance, please do not force the membrane into the shell, or it could lead to permanent damage to the membrane shell or membrane components (the membrane manufacturer does not take the responsibility for replacing components due to damage made during installation);
4. Damage to the membrane shell and membrane element caused under above mentioned situation is not covered by the warranty.
Common MattersHow many years can the membrane element use generally?
The membrane service life is decided by the membrane chemical stability, the element physical stability, clean ability, feed water, the clean frequency, the operation management level and so on. Under the reasonable operation can use 2 years.
What is the influence of pressure, temperature to the permeated water flow?
The pressure, temperature are higher, the permeated water flow is higher, vice versa. Working under the high temperature condition, the working pressure should be lower to make the water flux maintenance invariable, vice versa. Membrane element is withstanding high pressure high temperature ability.
What is the influence of pressure, temperature, feed water TDS to salt rejection?
The temperature and feed water TDS are higher, salt rejection is lower and permeated water flow is smaller.
The salt rejection rate increases along with the pressure, but the salt rejection rate no longer increase when surpasses certain pressure, certain saline matter and water molecule will penetrate the reverse osmosis membrane element.