Industrial Used Sawdust Rotary Drum Dryer Machine

Industrial Used Sawdust Rotary Drum Dryer MachineBrief Introduction of Wood Dryer:
It issuitable for dryingsensitive material likesawdust,rice hull,milledwheat straw,milled cotton/corn stalksand so on.
It is made up of heat stove, tube, impulse jar, function tube, fan, andcycloneseparator.
It can reduce moisture from40-45%to8-12%.
Fuel for the furnace: wood waste, coal. Waste oil and so on.
(Note:If the moisture of raw materials is more than 45%, the furnace required the bigger, please inform us when ordering.)
The Description of Wood Dryer:
The rotary drying machine is composed of stove, main rotary body, which reduces the moisture from 60% to 10%. The moisture evaporating capacity of our rotary drum dryer can reach to (250kg per hour to 8000kg) per hour. Different density materials, the final product are not the same; Also for different moisture of raw materials, which could get the different final capacity.
The Main Specification of Wood Dryer:ModelDia of rollLength
of rollGradientSpeed
(rpm)Weight
(t)Power
(kw)Cubage (m³)6GT- 0.6x8φ6008m3-585.14/6p2.266GT- 0.8x10φ80010 m3-57.26.94/6p5.026GT- 1.0x10φ100010m3-56.737.55.5/6p7.856GT- 1.2x12φ120012m3-55.813.111/6p13.316GT- 1.5x12φ150012m3-54.822.315/6p21.2
The Advantage of Wood Dryer:
1). Air heating system is able to allow highly efficient removal of water from fresh harvested forage, and the maximum durability of dehydrated forage.
2). Non-pollution to the target materials guarantees minimal loss of their color, favor, and nutritional ingredients;
3). Smoke collector working with the air heating system adopts water-recycled wet-type collecting method, and ensures the exhausted gas to satisfy the environmental protection requirement as well as the lowest water consumption.
The Spare Partsof Wood Dryer
The whole system consists of fan blower, motor engine, fuel boiler, steel pipe, cyclone and air lock.
The Principleof Wood Dryer
The wet materials are conveyed to the hopper through the belt conveyor or bucket elevator, and then enter into the feed end through the hopper charger and the feeding pipe in sequence. The inclination of the feeding pipe must be greater than the natural inclination of materials in order to make the materials flow into the dryer smoothly. The dryer cylinder with slight inclination with the horizontal line.
The materials enter from the higher end, and the heat carrier enters from the lower ender; The two contact each other from opposite directions, but there are also circumstances that the heat carrier flows into the dryer body together with the material. Along with the rotation of cylinder, the materials run to the lower end due to gravity. In the forward movement of wet materials in the dryer body, the wet materials are heated directly or indirectly by the heat carrier to dry the wet materials, and then the materials are discharged from the discharge end through the belt conveyor or screw conveyor.Wood Dryer for wood pellet line:
Detail Quotation Solutions for you, we need to know Informations as Follows:
(1). What is Your Raw Materials or Tell Us Your Materials Moisture Content?
-----Different moisture content of your raw materials, with different size of Rotary Drum Sawdust Dryer for you.
We need to know what is your raw materials, moisture content of it? and final capacity demand?
(2).What is Your Fuel for Rotary Drying Machine?
-----There are kinds of biomass could be Fuel for Rotary Drying Machine, if you have special demands please let us know. Like: Automatic Feeding Fuel for Rotary Drying Machine or not?
(3).Rotary Drying Machine Adjustable Items:
-----Feeding Heat Temperature Could Adjustable, Rotation Speed Adjustable.
All according to your raw materials information, moisture content and capacity demands.Related Products of Woodworking Machinery
1. Hot Sale Wood Pellet Mill
This wood pellet machine is suitable for making biomass particles such as sawdust, rice husk, paddy straw, sunflower stalk, hulls, forestry wastes pellet, etc.
2. Production Flow Chart of Complete 1T Biomass Wood Pelleting Plant Manufacturers
Wood Cutting --- Sawdust Grinding ---- Drying ---- Pellet Making --- Cooling & Screening ---- PackingIntroduction
Complete 1T Biomass Wood Pelleting Plant Manufacturers is the process of making waste materials into solid fuel. The biomass pellet mainly used for fuel.Suitable materialAgricultural waste, and forest or wood residues from furnatures, such as sawdust, waste pallets, rice husks, corn cobs, maize stalks, peanut shells, wood logs, and etc.Size3-5mm, 10-15% moisturePellet size6-12mm
Company Introduction:
We Zhengzhou LEABON are specialized in produing the wood pellet machine, feed pellet machine and the pellet product line-------Wood debarker, wood chipper, wood crusher, cooler, dryer, pack machine, baler etc. And also the filter press, wood briquette machine.
We can offer you the professional support and advice on the using of the machine. With the high quality and also the competitive price, our company have established many oversea clients. You are welcomed to vist our company and know more about the products.