Infrared Obstacle Avoidance Tracking Sensor Module

Infrared Obstacle Avoidance Tracking Sensor ModuleFeatures
The sensor module adaptable to ambient light, having a pair of infrared emitting and receiving tubes, transmitting tubes emit infrared certain frequency, when the direction of an obstacle is detected (reflection surface), the infrared reflected is received by the reception tube, After a comparator circuit processing, the green light is on, but the signal output interface output digital signal (a low-level signal), you can adjust the detection distance knob potentiometer, the effective distance range of 2 ~ 30cm, the working voltage of 3.3V- 5V. Detection range of the sensor can be obtained by adjusting potentiometer, with little interference, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, avoidance car, line count, and black and white line tracking and many other occasions.Module ParametersWhen the module detects an obstacle in front of the signal, the green indicator lights on the board level, while the OUT port sustained low signal output, the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer, detects the distance increases; counterclockwise adjustment potentiometer, reducing detection distance.2, the sensor active infrared reflection detection, target reflectivity and therefore the shape is critical detection distance. Where the minimum detection distance black, white, maximum; small objects away from a small area, a large area from the Grand.3, the sensor module output port OUT port can be directly connected to the microcontroller IO can also be directly drive a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO4, comparators LM393, stable;5, the module can be 3-5V DC power supply. When the power is turned on, the red power indicator lights;6, with the screw holes 3mm, easy fixed installation;7, board size: 3.2CM * 1.4CM8, each module has been shipped threshold comparator voltage adjusted by potentiometer good, non-special case, do not adjustable potentiometer.
Module Interface Description1 VCC 3.3V-5V external voltage (can be directly connected to 5v and 3.3v MCU MCU)2 GND GND External3 OUT small board digital output interface (0 and 1)
Our advantages:
Factory
OEM supported
Short time delivery
Flexible paymentAftersale service guarantee
Hardware&software technicians supported
Factory: there are over 200 colleagues in our Longhua factory
Sales&warehouse team: there are over 50 colleagues, locating in Chegongmiao where ensure the fatest dilevery.
Certificates FAQQ1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.Q2. What is your terms of payment?
A: Full payment. Goods would be shipped in 3-5 work days after payment received, finally depends on quantities.Q3. What is your terms of delivery?
A: EXW.Q4. How about your delivery time?
A: Generally, goods would be shipped in 3-5 work days after payment received, finally depends on order quantities.Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before deliveryFeel free to contact me if you have any question.