Injection Molding Machine/Injection Moulding Machine

The machine fit for producing PET preform and PP/PE caps.PET preform making machines(pet preform making systemspet preform making plantspet preform making equipments) uses a new part cooling and handling system, which features:1. Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
2. Optimized cycle utilization _ being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.GEYIN pet preform making machines are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 72 cavities.
GEYIN pet injection systems offer:
1. Faster cycles(10 second)
2. Reduced energy consumption
3. Smaller footprint
4. Improved repeatability
5. Rapid set-upFeatures:
1. One state plasticizing enables plenty injection quantity;
2. Take out plate with three working position insures sufficient cooling time and shorter cycle time;
3. High quality parts and accessories from world famous brands enable higher speed and precision;
4. Special screw design increases torque while brings down shear force to avoid degradation;
5. Accumulator from world reputable manufacture increases performance while brings down power consumption;Reflex Platens
Reflex platens distribute clamp force evenly across the platen face.
Reflex platens:
1. Allow for 10-30% lower clamp tonnage
2. Decrease mold wear
3. Improve part qualityInjection Units
GEYIN systems offer both reciprocating screw (RS) and two-stage injection units. RS units offer the performance required for many PET applications while two-stage is appropriate for higher throughput applications.Controls
GEYIN -based controls manage all functions of our PET production systems, with optional packages to integrate auxiliaries and downstream part handling equipment. Advantages include:
1. Faster cycle times
2. Improved shot-to-shot repeatability
3. Remote connectivity through ServiceNetlink
4. Control of molding system and auxiliaries from a single interfaceLinear Bearings
Linear bearings support the moving platen directly on the machine base. This design reduces mold wear by improving platen alignment and perpendicularity, and provides a grease free molding environment.injection moulding machinePET450PET680PET1000PET1450PET1800PET2300PET3200Injection unit

SCREW DIAMETER(mm)50606870808590SEREW L/D RATION25252526262626SHOT WEIGHT(PET@1.35)(g)40065010001450180023003200SHOT WEIGHT(BOPP@0.9)(g)266430660960120015002100INJECTION PRESSURE(Mpa)1147103610821136113211321132Clamping unit

CLAMPING FORCE(KN)1500168021802800338039805580TOGGLE STROKE(mm)380430470540670720780MIN.MOLD THICKNESS(mm)170180200220240280280MAX.MOLD THICKNESS(mm)480500530650710850850SPACE BETWEEN TIE BARS(mm)410x410460x460505x505570x570660x660720x720800x800MOVABLE PLATEN SIZE(mm)600x600675x675740x740840x845980x9801035x10351100x1100EJECTOR STROKE(mm)120130135145160160180EJECTOR NO (N)5599131313General

PUMP MOTOR POWER(KW)1518.52230373745HEATER POWRE(KW)8.59.213.517.621.323.826.7OIL TANK CAPACITY(L)2302403405706209501000MAX.PUMP PRESSURE(MPa)16161616161616MACHINE DIMENSIONS(LxWxH)(m)4.8x1.5x2.05.4x1.7x2.25.7x1.8x2.36.3x1.9x2.46.6x2.2x2.77.3x2.2x2.78.3x2.2x2.7MACHINE WEIGHT(Approximat)(t)3.756.58.11214.222PET 12-CAVITY,WEIGHT PER PREFORM(g)325479111173173173PET 16-CAVITY,WEIGHT PER PREFORM(g)24405983130130130PET 24-CAVITY,WEIGHT PER PREFORM(g)
3955868686PET 32-CAVITY,WEIGHT PER PREFORM(g)

41656565PET 48-CAVITY,WEIGHT PER PREFORM(g)
4343PP 12-CAVITY,WEIGHT PER PREFORM(g)21365374115115115PP 16-CAVITY,WEIGHT PER PREFORM(g)16273955868686PP 24-CAVITY,WEIGHT PER PREFORM(g)
2637575757PP 32-CAVITY,WEIGHT PER PREFORM(g)

27434343PP 48-CAVITY,WEIGHT PER PREFORM(g)
2828