Features of metal Cold Room Insulation Panels:1. Certeg cold room panel has low thermal conductivity with good thermal property. When the PUF is of the density of 35-40kg/m3, it's thermal conductivity will be only 0.018~0.024W/(m. K), almost half the thermal conductivity than EPS, . PUF is one of the best insulation material with lowest thermal conductivity.
2. After adding a flame retardant, Certeg cold room panel is a nonflammable and self-extinguishing material, it's softening point may be more than 250° C. Decomposition occurs only at higher temperatures.3. Certeg cold room panel is good at deformation resistance with a smooth surface not liable to crack or flake.4. High cost-efficiency. Certeg cold room panel can greatly reduce the cost of heating and cooling, which offset the lose of higher price than other material.5. Better insulation means reduction in electricity bill as well as less running of compressors so increase of compressor life. In case of electricity failure, rise in temperature will be slow because better insulation property of Certeg cold room panel.No.Surface Material and ThicknessThickness50mm75mm100mm120mm150mm200mm1Double face color steel sheet 0.326,0.426,0.476,0.5√√√√√√2Doube face color steel sheet(BAOSTEEL)0.4,0.45,0.5,0.55,0.6√√√√√√3Double face plastic steel sheet√√√√√√4Double face stainless steel sheet 0.5/0.4√√√√√√5Double face stainless steel sheet 0.8√√√√√√6Double face embossed alumium sheet√√√√√√7One face color steel sheet,one face stainless steel sheet√√√√√√8One face color steel sheet, one face zinc-coated steel sheet√√√√√√9One face color steel sheet, one face riffled stainless steel sheet√√√√√√10Polyurethane Plate√√√√√√