Intelligent Study Type Multi-Coin Acceptor (TR520)

TR520 - Intelligent Studying TypeMulti Coin Acceptor

Specification:

CPU system identify the coin's material, thickness and diameterImproved DUSTPROOF optical sensors. can be programmed into 5 vaIue channels for 5 different coins (expandable to 6 channels)can study and memorize maximum 20 token/coin samples per vaIue channelcontrol cable is selectable, which is used to enable/disablecoin acceptorby electric level (critical voltage = 3V)counter cable is selectable to connecta counter (meter)Default interface logic is PULSE. The BYTE, RS232& USB interfaceareavailable with different pricesintelligent CPUauto recognize systemApply to coin diameter:18mm-29mmApply to coin thickness:1.2mm-3mmwork voltage: DC12V (+/- 20%)current in 50maNet weight: 450grams/eachCPU system identify the coin's material, thickness and diameterInclude software guard system to prevent opportunistic behaviorsCan connect the counter (meter)OPERATINGMODE SWITCH can be set to N.O.(Normal Open) and N.C.(Normal Close)SPEEDSWITCH can be set to fast-25ms, medium-45ms and slow-65ms

How To Set Up WithThe CoinMachine:

Step 1:Switch to the correctoperating mode of coin machine (normally N.O.)Step 2: Switch to the correct speed (pulse length) of coin machine (normally MEDIUM-45ms)Step 3: Connecting the +12V DC and Ground wiring for the coin Acceptor.Step 4: Set the mode-switch from "Start" to "Set" position, the LED light will show defualt "00", press the vaIue-adjustor to set the vaIue from "01-99" for the coins to be programmed (for example, set $1 coin as "01").Step 5: Prepare the needed sample coins.Step 6: Insert maximum 20pcs coins (for example, 20pcs of $1 coins) in turnfor study(time interval 0.3 seconds). If less than20 coins, can study more in future. After the memory of current vaIue channel is full, it will sound withthreebeeps.Step 7: Repeat step 4 to step 7 to program the next vaIue channel (for example, the channel of $2 coin), and maximum 5 channels can be programmed.Step 8: Turn the coin set switch to "Start" and finished the setting.Step 9: Set the sensitivity-switch from "NOM" to "MGN" position, then turn the mode-switch from "Start" to "Set" position, the LED show default "01", press thevaIue-adjustor to set the vaIue. "01-99" means how much the deposited coins vaIue should be added up to for a pulse signal output, and we call this accumulated vaIue as "signal output unit". For example - we set the vaIue of $1 coin& $2 coinas "01" & "02", and set the "signal output unit" as 03, a pulse signal will only be sent when the deposited coins added up to $3.Reposite thesensitivity-switch and mode-switch to finish the setting.Just skip this step if a pulse signal should be sent foreach single vaIue of the programmed coins (i.e. - coin vaIue = number of signal output, for example, coinvaIue = "02" = 2 pulsesignal output)Step 10: If need to cancel/clear the programmed parameters, return to step 4, and then press and hold vaIue-adjustor untill hear a long beep.

Packaging:

Each piece packed into a small white box, size is W140 x D130 x H70 (mm)30pcs packed into a carton, size is W420 x D380 x W300 (mm)