Internal Release Agent for Epoxy Resin Pultrusion

When creating parts from molds-or even molds themselves-applying a release agent is an important step in the process. Mold release agents serve two basic purposes:
Mold releases act as a parting agent between layers of resin and the mold surface, so that cured parts can be removed without damaging the part or the mold.
When applied properly, mold releases help create a durable, high-gloss surface finish for finished parts.
Mold Releases help to preserve the integrity of your part and avoid damage to both the part and mold. The effort required to apply a quality release agent during preparation far outweighs the hours spent correcting damage later.Main chemical indicators:
Appearance: yellowish transparent viscous liquid
Active ingredients:100%
Flash point(PMCC):98
Proportion:0.98kg/d(20)
PH value:3~8
Viscosity(P):250MPaS (30)
HLB value:8
Melting point:-5Characteristics:
Light, non-toxic, having good compatibility and dispersion with the resin system
Having excellent lubricity and abrasion resistance, no need to add additional release agent
Using black metal grinding tools to prevent corrosion when stored
Being able to improve the surface performance of the forming parts
Being able to eliminate some of the attachment problems with the moldRecommended dosage:
based on the resin is less than 1% and combined with the product type to adjust, the best dosage is determined by the selective test.Storage and packaging:
It is non-toxic, non-flammable, non-corrosive and has good storage stability. It should be placed in the ventilated area. It should be packed in 25g plastic bucket.Instructions:
It should be mixed into the resin system before the filler is added.
Picture of product: