Jinggong full automatic n95 and face mask production line for disposable face masks

Jinggong full automatic n95 and face mask production line for disposable face masks

Product Description

This machine is used for automatic forming of folding masks, the whole process including: raw material roll unwinding, roller driving, feeding nose clip, welding and wrapping nose clip, (pneumatic valve hole optional), (printing optional), welding earloop 1, welding earloop 2, folding, edge welding, cutting, finished product output, remaining material output and etc., then conveyed out. The entire process is fully automated. The production line has advantages such as stable performance, high output capacity, low defect rate, and easy operation.

Dimension

8000mm(L) X1400mm(W) X1600mm(H)

Color

International standard warm grey 1C

Weight

≤3000kg, ground weight capacity≤500kg/m2

≤5000kg, ground weight capacity ≤500kg/m2

Working power

equipment 220VAC±5%; 50HZ;rated power 17KW

Working air pressure

Compressed air pressure 0.5-0.8MPa; compressed air flux 300L/min(stable flux guaranteed; oil and water have to be filtered)

Production efficiency

1800-2500PCS/H(based on 20 hours each day, daily capacity about 36,000-50,000 pieces)

Qualification ratio

99%(excluding unqualified incoming materials, improper operation by employees)

Equip failure ratio

≤2%(equipment failure itself)

Operating environment

Temperature 10~35℃; humidity: 5-35%HR

No flammable, corrosive gas, no dust (cleanliness no less than 100,000 grade)

Raw Material Recommendation

Cloth:(meltblown nonwoven, PPnonwoven)

1.Does one machine can only produce one size?

Not exactly, it depends on the machine.

2.Do you have after sales support?

Yes, we are happy to give advice and also have skilled technicians available to maintain the machine if needed.

3.How to visit your company?

We can pick you up from Shanghai or Hangzhou airport. Or railway station Shaoxing North.

4.What can you do if the machine broken?

Our machine's warranty period is 12months. if the broken parts can't repair, we can send the new parts replace the broken parts, but you need pay the express cost by yourself. if after warranty period, we can through negotiation for solving the problems, and we supply the technical support for the whole life of the equipment.

5.Can you be responsible for transport?

Yes, please tell us the destination port or address. we have rich experience in transport.

6.You are trade company or factory?

We are Manufacturer.

7.Why your price is higher than others?

As we persist on that each factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality. We can make sure that our machine could use more than 20 years without any problem.

8.Do you have overseas engineers?

Yes, we not only provide overseas engineers, but also provide technical training.

9.Do you provide customized?

Sure, we can design the equipment according to the data of the structural section you provide. We are professional sheet metal forming machine designer and manufacturer.