K1350 Hydrogenated Organic Heat Carrier Heat Transfer Fluid Oil

1.Characteristics of K1350 Hydrogenated Organic Heat Carrier:
K1350 hydrogenation synthesis of organic heat carrieris madefromthe base oil afterSSOT, MHC, MDDW and HTprocesses by adding functional additives, and is classified as type III synthetic oil in European and American countries.
K1350 hydrogenation synthesis organic heat carrier has good thermal stability and oxidation resistance. Under the same conditions, its service life is better than mineral type.The life of the heat transfer oil is doubled.
K1350 hydrogenated synthetic organic heat carrier components are pure, clear and translucent.
K1350 hydrogenation synthetic organic heat carrier has a higher flash point, ignition point and spontaneous ignition point to ensure the safety of the operation process.2. K1350 General InfoIndexEnglish1Model: K13502Name: Hydrogenation synthesis of organic heat carrier3Names: Hydrogenation synthesis of heat transfer oil4Standard: GB 23971-20095Compose: Saturated alkanes6Molecular formula: nCH37Molecular weight: 3208Operating temperature: -5~300ºC9Operating state: Liquid phase
3. K1350 Thermaldynamics DetailºC
Temperaturekg/m3
Density mm2/s
Viscosity kcal/m•h•ºC
Thermal Conductivitykcal/kg•ºC
Specific Heat20 875 72 0.1177 0.45150 838 27.6 0.1168 0.479100 813 4.2 0.1099 0.526150 780 2.9 0.1011 0.572200 761 0.98 0.0926 0.616250 738 0.67 0.0855 0.658300 702 0.52 0.0800 0.699320 681 0.46 0.0782 0.7254. K1350 COAModelNameStandardK1350 Hydrogenation Synthesis of Organic Heat CarrierGB 23971-2009ItemStandardTest ResultsMethodsAppearanceClear and TranslucentClear and TranslucentVisual InspectionMax. Operating Temp.(MOP)/ºC 300 300 GB/T 23800-2009Max. Membrane Temp./ºC 325320GB/T 23800-2009Natural Point/ºC
No more less than MOP 336SH/T 0642-1997Flashing Point/ºC 100
>=100210GB/T 261-2008Flashing Point/ºC 180 216GB/T 3536-2008Sulfate Content/%0.2
<= 0.20.0015
< 0.001SH/T 0689-2000Chlorine Content/mg/kg 20
<= 200.1 BAcid Value(KOH)/mg/g 0.05
<= 20N/AGB/T 7304-2000Copper Corrosion(100ºC,3h)/ 1
<= 1 1aGB/T 5096-1985Moisture /mg/kg 500
<= 500 N/ASH/T 0246-1992
Water soluble acid and alkaliN/AN/A GB/T 259-1988Pour Point/ºC -9
<= -9-246GB/T 3535-2006Density(20ºC)/kg/m3Report830~860 SH/T 0604-2000Ash/% Report0.001
< 0.001GB/T 508-1985
Distillation range/ºC
Initial PointReport320SH/T 0558-19935%/ºC Report356GB/T 6536-2010Carbon residual/% 0.05
<= 0.050.01
< 0.01GB/T 17144-1997Kinematic Viscositymm2/s0ºC Report-GBT/T 265 198840ºC 40 28~36 100ºC Report5.38
Thermal StabilityTest Temp./ºC 300 300GB/T 23800 2009Test Duration/h 720 720
Appearance,
Translucent without floating substances
Brown and translucentDegradation/% 10 Qualified