Kg316-II Programmable Digital Timer Switch, Timer Switch, Timer

PROGRAMMABLE DIGITAL TIMER SWITCHThis Din Rail Mounted Digital Timer series can beoperated in 4 separate power supplies, rangesfrom 240Vac to 12Vdc Output format can beproduced to be Volt-free or voltaic
Batteries of Lithium 1V2/40Mah or recharge bie V60Davailable for option which is for re taining the programingduring Timer' so perating power disconnected.GENERAL INFORMATION
This Digital Timer is accurate to the minute, designed with either 17or 18ON/OFF(event)per day Graphic description, as below:
Also, it provides 15-combination of daily- programs which can leadgreat convenience to users upon choosing the required days in a weekfor operation the timerBASIC FEATU RES:
Din Rail Mounted
Advanced pre-setting one week before
Digital electronic timer switch with daily &weekly programs
Repeat prog rams with 18 on/off setting and manual override
Lithium battery power reserve when electric supply cut offTECHNICAL data:
Voltage rating: 12VDC/AC, 24 VDC/AC, 48VDC/AC, 110VAC, 220VAC
Correction: 1secday (25C)
ON/OFF operation: 18 ON/OFF 36ON 1-99S
Power consuption:≤2W
Service life: Mechanical 10. Electrical 107
Display: LCD
Minimum interval: 1 minute
Weight: appro x 125g
Power reserve:60 d
Ambient temperature: -10-+40C
Ambient humidity 35-85%RH
Battery life: 3 years(Lithium battery)THE USE OF THE KEYBOARD LOCK
Hit the "clock"key on the keyboard first, then according to fourconsecutive"after elimination"button, display the bottom left corner willappear a"a"symbol. the keyboard is locked at this time, when thewitch does not accept general operation on the keyboard. Repeat theabove steps, the" symbol will disappear, when the keyboard is inthe lock state, acceptable operating instructions. Press the eliminationafter"key and" week "button to enter a dormant state press reset buttonto restart. Note: when the factory usually dormant. Boot, please pressthe"C" keyPROGRAMMING THE TIMER
A Functional description to buttons on panel
1.e programs review& setting programs
2. MANUAL: To select"oN, auto or OfF
3.9: To adjust current DAY and TIME
4. D+: To adjust day or week
5. H+ To adjust hour
6. M+: To adjust minute
7. C: Reset TImers setting
LED: To indicate ON/oFF status
Press c button to reset TImer before programming
B Adjusting CLOCK
Press and hold and the press D+ key, H+ key, M+ keyrespectively to adjust clock of Timer to accurate
MINUTE In 24-Hour -Format LCD screen shall indicate 0: 00-23: 59
C Start to programming the P
1.Press P key LCD screen shall show
2. Press D+ key to select any of 15-combination of Daily-Programs to your application demand. Continuing to press D+ key, LCD shallalternating indicate among 15-combinationso
3. Press H+, M+ respectively to set desired Hour and Minute for
4.After finished setting of 1, press key againshall appear on LCD screen
5. Press D+ key to select any of 15-combination of Daily-programs toyour applieation demand continuing to press d+ key, LCD shallalternating indicate among 15-combinationsDay-combination chosen in each of oN/OFF program-periodmust be consistent
6. Repeat Programming procedure"3 to set desired Hour Minute for
7.When finished setting 1N&1F, press Pappear on LCD screen
8. Repeat programming procedure above to complete rest ofON/OFF program-period (event).
9. When finished program-setting(event),press