Kitchen pots and pans from quality alumium circle diskAlloy: 1050/1060/1070/1100/3003
Thickness: 0.4-8.0mm
Diameter: 85-1250mm
End-use: Cookware, reflector, satelliteThe properties of aluminum circles (or shaped blanks) make them ideal for use in a number of markets including the cookware, automotive and lighting industries:
Low anisotropy, which facilitates deep drawing
Strong mechanical properties
High and homogeneous heat diffusion
Ability to be enameled, covered by PTFE (or others), anodized
Good reflectivity
High strength-to-weight ratio
Durability and resistance to corrosion
Signi aluminum offers circles and shaped blanks in a wide range of alloys, tempers, thicknesses and diameters to meet all likely customer requirements.Aluminium circlesThe properties of aluminum circles (or shaped blanks) make them ideal for use in a number of markets including the cookware, automotive and lighting industries:AlloyTemperThicknessDiameter1050, 1060, 1070, 1100, 3003O, H12, H140.36~10mm20~1200Remark: special specifications can be produced according to your requirementDimensionsParameterRangeToleranceThickness for circles (mm)0.71 _ 6.35for 0.71 to 1.4 +/-0.08for 1.41 to 2.5 +0.1, -0.13for 2.51 to 4.0 +/-0.13for 4.01 to 5.00 +/-0.15for 5.01 to 6.35 +/-0.20Thickness for ovals (mm)1.75 _ 3.00for 1.75 to 2.5 +0.1, -0.13for 2.51 to 3.00 +/-0.13Diameter (mm)102 _ 1250(a) sheared circles +2, -0(b) punched circles +0.5, -0Earing< 5% for ' O' temper
< 9% for H12, H14, H16, H18Mechanical propertiesAlloy (AA)Temper%E (min)
(at 50 mm gauge length)UTS (mpa)Bend test: radius of bend
(T=material thickness)MinMax1050O295595closeH146951251/2TH184125-1T1070O2995-closeH146951201/2TH184120-1T3003O2590130closeH1451301801/2TH1641501951TH183170-3TChemical compositionAlloy (%)AA 1050AA 1070AA 1100AA 3003Fe0.400.251.000.70Si0.250.20(Fr + Si)0.60Mg0.050.03--Mn0.050.030.051.00 _ 1.50Cu0.050.040.050.05 _ 0.20Zn0.050.040.100.10Ti0.030.030.050.10 (Ti + Zr)Cr----Each (others)0.030.030.050.05Total (Others)--0.1250.15Al99.5099.7099.00RemainingSurface qualityFree from scratches, pit marks, rolling bandsApplicable standardsASTM - B - 209M, Aluminium association _ aluminium standards and data, Hindalco manufacturing limits (as applicable).PackingThe circles are packed in boxes or pallets with interleave paper, polythene, foam / thermocol. Pallets and boxes are strapped with hoop iron and clips. Silica gel packets are placed in the boxes for moisture protection.