Kraft Paper Slitting Rewinding Machine (JT-SLT-800/2800C)

Kraft Paper Slitting RewindingMachineIt used for slitting paper, kraft paper, paper board, card board, bond paper, non-woven cloth, film, aluminium foil etc.Specifications:
1. It adopts Siemens PLC control system and 7" touch screen, all the working parameters can be displayed on the control panel then the machine will automatic work.
2. It adopts two sets of Yaskawa frequency inverter which is from Japan to make working machine more stable.
3. It adopts two sets of Fukuta inverter motor, which is from Taiwan.
4. It adopts three sets fully automatic tension control to provide the constant tension to the end.
5. Automatic lift-up loading system for heavy jumbo roll loading.
6. A set of photocell tracking system imported from Germany.
7. Two kinds of blades: Round blades and razor blades.
8. Automatic meter counter to stop the machine when it reach the pre-set length.
9. Air Blower and blower pipe for trimming the waste edge.
10. All transmission rollers have been dynamic/static balance treated.
SpecificationsCategoryAutomatic Shaftless & Coreless Paper Slitter MachineApplication MaterialRegular Papers,Kraft Paper, Bond Paper, Paper Board,Non-woven Cloth, Film, Aluminum Foil, Plastic Sheet etc.Applicable Width of Axial / Material600mm ~ 2800mm /23.6-110" (Customizable)Min. Width of Slitting10mm (Depending on kinds of source material are applied)Max.Machine Speed300m/min (Depending on kinds of material applied)Max.Unwinding Diameter1500mm /59"Max.Rewinding Diameter1500mm(Customizable)Tolerance of Slitting Width±0.15mm(Depending on kinds of material applied)Max Applicable Weight of Material4000 Kg (Customizable)Rated Frequency50Hz & 60HzRated Voltage380V,415V, 440V, 460V, 480V,or Dual-Voltage (Customizable)Unwinding/Rewinding ShaftShaftless unwinder & Pneumatic Air Expanding ShaftOverall Dimensions2000 x 2500 x 1500mmWeight4000kg
Environmental RestrictionLocationIndoor. The product should be installed on flat and solid foundation.Voltage Regulation±10%Frequency Regulation±5%Ambient Temperature-5°C~40°CAltitudeNot exceed 1000 MetersRelative HumidityLess than 85% RH (Non-Condensation)
ComponentsUnwinding Section-Shaftless unwinder,the cam size is 3''&6''
-Hydraulic automatic lift-up loading system
-Tech Mach analog EPC from USA
-RE Brake from Italy
-Tech Mach Floating roller constant tension from USA
-Tech Mach Sensor from USA
-Self expandable chuck
-Guide & Slide AMT from TaiwanSlitting Section-Choices of Razor cutter or Disc cutter
-Disc Cutter Assembly adopt the cam self-locking
-Cutter with adjustable and moveable blade base.
-Meter counterRewinding Section-3"air expanding rewinding corelessshafts
-Center Rewinding technology
-Pressure roller
-Electromagnetic Clutch from TaiwanControlling Section-Siemens PLC & HMI from Germany
-All the parametersare displayed on the monitor
-Low voltage electrical appliances all from SchneiderTrimmed Waste Edge-Edge Waste Blower with Expulsion TubeOptional-Friction Differential Shaft for rewinding.
-Safety guard for the slitting device.
-Emergency Switches on the 4 corner of machine.
ConfigurationNameModelPiecesRemarkComputer SystemPLC(Siemens)+4DA+7''Touch Screen(Taiwan)+
Synchronic(Korea)1SetSiemens+ WeinviewMotor2 SetsFUKUTA From TaiwanFrequency Inverter2 SetsYASKAWA From JapanUpper/Lower Round Knife10 SetsJota MachineryBrakeRE Brake from ItalySensor2 SetsTech Mach Sensor from USATension control3 SetsTech Mach Floating roller constant tension from USAEPC1 SetTech Mach analog from USAChuckSelf expandable chuck1 SetFrom TaiwanPhotocell Tracking2 SetSIKC From GermanyMagnetic Clutch2 SetsFrom TaiwanLow Voltage Electrical SwitchSCHNEIDERBlower1 SetChina