Kyn28A-24 High Voltage Metal Clad and Enclosed High-Voltage Electric Power Distribution and Control

This is our strong and main product.
Type KYN28A-24 and AC metal enclosed swithchgear is suitable for 3-phase indoor 50/60Hz and 24 kV power system and is mainly used in power plant,substation and enterprise and high building as power receipt and distribution and monitor,protects and controls the electric circuit.
Type KYN28A-24 clad AC metal enclosed swithgear has various functions to prevent incorrect operation,prevent to move the hardcart with load,prevent the circuit breaker from closed when the earthing swith is at closed position and prevent to make earthing switch at live condition and to enter into the live isolation compartment.
The switchgeat has excekkent VS1 and VS2 series HV AC vacuum circuit breaker and fixed vacuum switchgear
The secondary circuit of the switch has reliable control and protection elements.The busbar adopts thermal shrinkage insulation material or exposy coating insulation means to optimize electrode shape.The cabinet is compact in structure and the switchgear is distribution equipment with advanced technology,stable performance,reasonable structure,convenient application,safe and stable feature.Normal Service Condition
1.Altitude:≤1000m(abovesealevel);
2.Ambienttemperature:Max.40CMin.-15C
The average value shall not exceed 35 C within 24 hours;
3.Relativehumidity:Dailyaveragevalue≤95%,monthlyaveragevalue≤90%
4. The average of daily steam pressure is no more than 2.2Kpa,the average of monthly steam pressure is
no more than 1.8kPa;
5. The ambient air has no dffect from surrounding dust,smoke,corrosive or flammable gas,steam and salt
mist.
6.The vibration or earthquake from outside of swithchgear and control gear are negelected;
7.The electromagnetic interference amplitude induced in the secondary system is no more than 1.6kV.
Customershouldnegotiatewithmanufactureriftheserviceconditionisdifferentfromabove.Special Service Condition
In case of application exceeding the specification of GB/T11011,the customer and the maunfacture shall
negotiate and reach agreement.For preventing condensation,the switchgear has heater which can be put into operation when the switchgear is at back up condition.The heater shall also be used in the normal operation of the swithchgear.
Ouradvantage
1.Variousspecialrequirementfromcustomerortypicalspecification.
2.Competitiveprice(Realfactory).
3.Excellentqualitycontrol.
4.Goodserviceandaftersales.
5.Intimedelivery.
6.Manufacturingafterdrawingsapproved.
7.OEMisacceptable.
Wecanchangethedesignasclient'srequirements.
Moreinformation,pleasefreelycontactus.Gladtoserviceyou.please visit us: www.zhongjidq.com
For more details,welcome to visit us: www.zhongjidq.com