LCP40H-E HOSE TYPE ConCRETE PUMP
Product Description:LCP40H-E hosetype concrete pump was designed based on the squeeze hose pump,this concrete pump useshigh pressure, resistingwearsqueeze concrete hose with steel wire reinforcement layers, the working pressure is up to 25 bars.More widely used for pumping foam concrete, lightweight formconcrete, mortar and refractory materials. The concrete pump also could be used for spraying concrete or refractory materials.
Product Feature1.Compact size:hopperwith agitator,hose pump, power combined in a base frame.2.Soft start: electric motor smoothly start and protect the motor3.Low wear: the squeeze hose is the only wear part of the pump and can be replaced very quickly4.Delivers even the most difficult materials5.Quiet pumping process6.Forwards and reverse, easily to removal the block.7.Clean on the line:Quick and easy cleaning8.No residual concrete remains in the system
Product SpecificationDescriptionparameterHose PumpLH100-1050Hose ID100mm (Trelleborg Squeeze hose)Pump Speed39rpmRated Output45m3/hPressure2.5MpaMax. Aggregate size<20mmConcrete Slump15-23cmHopper Capacity400LHopper mixing speed37rpmPower Voltage45KW 50HZ IP55 3~380VOverall Dimension3080x1560x1730mmWeight2840kg
IP65 waterproof vibrator
The gap size between roller and
Pump house is sited by the below scale, then by locked by screw.
Almost no residual concrete
Nearly 100 % of the concrete in the hopper can be
delivered to the construction site. I.e. no more
concrete residue, and expensive
concrete residue disposal can also be avoided.Delivers even the most difficult materials
Delivers even the most difficult of materials: steel
fibre concrete, broken material, screed, foamed
concrete, fluid concrete, lightweight concrete up to a
particle distribution of 20 mm.
Even pumps broken material, if this has a good share
of fines in the concrete mix