Level Continuous Casting Combined Melting Furnace and Holding Furnace

Parameters for120kw Melting furnace and 75kw Holding furnaceBody Sizes: Diameter 1200mm, height 1000mm ,capacity 2.5tons for melting furnace. L*W*H=1100mm*1100mm*1100mm, capacity 3 tons for holding furnace.
Top plate thickness: 40mmSide plate thickness with strand holes: 30mm
Side plate thickness without holes: 16mm
Side plate thickness(Round plate) for Melting furnace: 12mm
Bottom plate Thickness for melting furnace:20mmMaterial for water jacket is 316# stainless steel, the thickness of outpart will be 3mm and the thickness of inner part will be 2mm.Inductor thickness : 18mm for melting furnace.16mm for holding furnaceThickness for copper coil: 13*14*1.8mm for melting furnace 10*12*1.5mm for holding furnaceThe electric meter of melting furnace should be 1000A with delixi brand and indicators and buttons with English version.All capacitors should be Jiudu brand made in China and capacity of them is 20KVR.The stage 300 voltage and 340 voltage will use Mitsubishi brandThe full voltage will be 380V and adjustable voltage will be 90V, 120V,150V,180V,210V,240V,300V and 340V(high voltage in adjustable stage).All electric circuit should be the same as huadong`s drawing which customer supplied.The screw should be more pcs to fix the furnace moreThe welding quality should be best and smooth for all gap, but not point by point.Factory should supply the drawing of graphite seat.2 Water pumps and water circuit for cooling water jacket of graphite dies.Transformer and actuator: 500kg300kgTransformerCopper tube10*10*1.5mm8*8*1.5mmShape230*170*350mm190*150*340mmActuatorCopper tube10*10*1.5mm10*10*1.2mmShape260*210*220mm250*200*240mmThe design for output part of refractory glass brick and graphite seat will be based on factory`s design.Temperature controller system and the temperature wilbe shown on the screen of the working table.The height from ground to center of outlet will be based on customer`s requirement.The iron core will be mouth shape. And the material will be silicon carbon steel.Diameter of melting furnace hydraulic actuators are 145mm.Thermal couple`s hole diameter will be 50mm and the hole for stopper on melting furnace diameter will be 130mm.Size of melting inlet on the holding furnace: top plate is 400*400mm.Thickness of top plate is 40mmThe working table is independent from electric cabinet and all indicators is marked in English version.