Light Welding Manipulator (NHCZ-1515)

Precision type welding manipulator/welding column and boom /pipe welding manipulatorNHCZ-1515
This machine set the switch interface aside peripheral equipment, can be composed and linkage with welding positioner, turning rolls and welding power, can achieve automatic welding for the girth and straight of the inside and the outside of the cylinder or other metal structure.(1)Welding manipulator are used for the inside and outside circumferential and longitudinal welding.
(2)It mainly consists of column, boom, pedestal, ladder, electrical equipmet and hand control box. We also offer welding head and flux recovery system if customer require.
(2)There are three types for you to choose. Fixed type, Fixed with rotation type, movable type.
(3)Column can do both retracting (left and right) and lifting(up and down) movement to meet weld need.
(4)The speed of retracting are adjusted by Frequency Conversion Speed Control(VFD). It is precise and stable.
(5)Movable type cab be used with track together, to facilitate operation.
(6)Column and boom are often used with welding rotator and positioner together. (as show in following picture)
(7)Welding head and Flux recovery system are offered
(8)Hand-control box is offered to facilitate operation
(9)There is safty device.This welding manipulator can be used in match with automatic welder, welding rotator (roller stand) or welding positioner (turing table), and for the inside and outside circumferential and longitudinal welding. It is also applicable to automatic welding
Model
NHCZ-1515
Power Input
3ph 380V AC 50/60Hz
Beam Lift Itinerary
1400mm
Beam Stretch Itinerary
1300mm
Beam Lift Speed
700mm/Min
Beam Stretch Speed
200-1500mm/Min
Beam Drive Mode
Inverter Motor +Ball Screw Drive
Head Level Fine-tuning Itinerary
100mm
Head Vertical Fine-tuning Itinerary
100mm
Head Adjustment Mode
Electrically Adjust
Control Mode
Hand Control Box Control
H*L* B Over Dimension H*L*B
2300*2200*620mm