Lubricating Grease Processing White Oil

Lubricating Grease Processing White Oil - KN40101. Product IntroductionThe product takes karamay Sinkiang low condensate naphthenic crude oil as the raw material, through the atmospheric vacuum distillation cutting out the appropriate fraction, then through via the high pressure hydrogenation device to refine and then and produce the ultimate aim product: refining produces the final purpose product.2. Product Specification
Analysis ItemsKN4010Test MethodAppearanceCrystal ClearVisual TestSeibert Color ≮+30GB/T3555Kinematic Viscosity
(40ºC),mm2/sReportGB/T 265Kinematic Viscosity
(100ºC),mm2/s9.0~11.0GB/T 265Density (20ºC),kg/m3ReportGB/T 1884Flash Point,(Opening),ºC ≮200GB/T 3536Pour Point,ºC≯-15GB/T 3535
Carbon Type Analysis %CA≯1
SH/T 0725CN≮40CPReport
The above technical parameters only represent the typical data of standardized brand products, the specific products shall be subject to the actual contract provisions.3. Product Feature1) Lower pour point and excellent low temperature fluidity, free of any coagulant
2) Low residual aromatic hydrocarbons, high naphthenic hydrocarbon content and suitable appropriate solubility3) Stable carbon skeleton, reasonable hydrocarbon composition4) The product is highly refined and keeps good solubility with rubberDeeply refined, good intermiscibility with rubber.
4. Product ConsiderationAll containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.Storage & preservation:It must be placed in cool and ventilated place. Insolation and moisture are prohibitied.5. Product ApplicationThe oil can be applicated to hot melt adhesive, vaseline, shoe sole material / TPR, unguent, top grade greese.6. Product Packing
7. Contact