Magnetite Rotary Kiln, High Quality Magnetite Clay Rotary Kiln, Bauxite Small Rotary Kiln

Gypsum Rotary Kiln/ Cement Clinker Calcinations Stoving Machine/ Rotary Kiln Price, Gypsum Rotary Kikn, Rotary Kiln Price
1. Introduction of High Quality Iron Ore Rotary Kiln, Magnetite Rotary Kiln
A rotary kiln is an apparatus that uses ahigh-temperature heat source to fire raw materials such as cement raw material, limestone, and magnesia that have been loaded into arotating kiln. Since combustion is easy to control, it can also be used to incinerate noncombustible objects, such as industrial waste and marine life that has greatly varied physical properties that cannot be controlled at other incinerators.
2.Controllable heatof High Quality Iron Ore Rotary Kiln, Magnetite Rotary Kiln
According to the exterior, therotary kilnscan be divided into diameter changes rotary kiln and size rotary kiln, into cement rotary kilns, ceramsite sand rotary kilns, soil rotary kilns and lime rotary kilns based on the purposes, into gas powered rotary kiln, coal-fired rotary kiln and mixed fuel rotary kiln depending on the different effects.
3. Features of High Quality Iron Ore Rotary Kiln, Magnetite Rotary Kiln
1. Advanced structure,
2. Stable operation,
3. Easy to operate,
4. Reliable quality,
5. High efficiency and energy saving,
6. Safe and environmentally friendly etc.
4. Structure of High Quality Iron Ore Rotary Kiln, Magnetite Rotary Kiln
The basic components of arotary kiln are the refractory lined shell, support tyres and rollers, drive gear and burner system. Atypical Rotary Kiln is cylindrical shell, slightly inclined from the horizontal and supported on two or more tyres, which in rotate on rollers. One of the tyre is fixed by aset of thrust rollers to take care of the thrust load during kiln movement. The drum assembly along with tyres is rotated by agirth gear/pinion arrangement.
5.Principleof High Quality Iron Ore Rotary Kiln, Magnetite Rotary Kiln
A ROTARY KILN is aDirect Fired, Refractory Lined equipment for high temperature applications where it is necessary to change the "state" of the material in acontinuous process or in batch type process. Since this process usually requires along residence time, the length to diameter ratio is often in excess of 10:1 in acontinuous kiln. In most cases an oil or gas burner fires directly into the discharge end of the unit. The material is heated in three ways -by radiation from the burner flame, conduction from the refractory lining and convection by contact with the hot gases. They are also used for roasting awide variety of ores.
6. Parameters of High Quality Iron Ore Rotary Kiln, Magnetite Rotary KilnSpecification
(m)Kiln dimensionsMotor
power
(kw)Total
weight
(t)NoteDiameter
(m)Length
(m)Obliquity
(%)Capacity
(t/d)Rotation
speed
(r/min)Φ2.5x403.250410000.6-3125278Outside
disassemble kilnΦ2.5x503603.53000.3-2100310Alumyte-alumina
forge kilnΦ2.5x543483.57000.6-3.48100237Outside
disassemble kilnΦ2.5x403.250410000.6-3125278Outside
disassemble kilnΦ2.7x423453.55000.5-2.4775210.94------Φ2.8x442.8443.54000.437-2.1855201.58Outside
disassemble kilnΦ2.8x442.8443.54000.437-2.1855201.58Outside
disassemble kilnΦ3.0x452.7423.53200.10-1.5255198.5------Φ3.0x482.5543.52040.48-1.4555196.29------Φ3.0x452.7423.53200.10-1.5255198.5------Φ3.0x602.55032000.62-1.8655187.37------Φ3.2x502.5403.51800.44-2.4455149.61Kiln with shaft
cyclone preheaterΦ3.3x523.3523.513000.266-2.66125283Kiln with preheater
precalcineΦ3.5x543.5543.515000.55-3.4220363Kiln with preheater
precalcineΦ3.6x703.6703.518000.25-1.25125419Generating
kiln for using
of the heatΦ4.0x56456423000.41-4.07315456Kiln with preheater
precalcineΦ4.0x604603.525000.396-3.96315510Kiln with preheater
precalcineΦ4.2x604.260427500.41-4.07375633Kiln with preheater
precalcineΦ4.3x604.3603.532000.396-3.96375583Kiln with preheater
precalcineΦ4.5x664.5663.540000.41-4.1560710.4Kiln with preheater
precalcineΦ4.7x744.774445000.35-4630849Kiln with preheater
precalcineΦ4.8x744.874450000.396-3.96630899Kiln with preheater
precalcineΦ5.0x74574460000.35-4710944Kiln with preheater
precalcineΦ5.6x875.68748000Max4.238001265Kiln with preheater
precalcineΦ6.0x95695410000Max5950x21659Kiln with preheater
precalcine

Zhengzhou HengXing Heavy Equipment Co.,Ltd

Zhengzhou Hengxing is ajoint stock corporation integrating scientific research, manufacture, marketing and exporting with the main target at the large and medium sized series of heavy duty equipments for mining, ore selecting, wall materials, formed coal, metallurgy and ect. The company located at Zhengzhou National High-Tech Development Zone.

We are specialized in the research, development, and production of industrial crushing, powder grinding, mineral processing equipments and other related devices. These products include Stone Crushers, Jaw Crushers, Cone Crushers, Hammer Crushers, and Sand making Machines, Sand Washing machines, Rod Mills, Powder making Machines, Ore Dressing Machines, Briquette Machines and complete Cement Output Lines. Our products have been sold to areas of Southeast Asia, East Europe, South America, the Middle East and Africa etc, and more foreign markets will be promoted in future.