Matel Detector with Pushing Type Rejection System

ModelOKP02Inspecting AbilityFe, Al, Pl, Cu and other non-ferrous metal, SusTunnel Passing Width300mmTunnel Passing Height150 mmBelt Width270 mmSensitivityFe≥Φ0.8mm, Sus≥Φ1.5mmControl Panel5.6 inch Touch Screen ControlOperation LanguageMultiple languages: Spanish, English, and other languageProduct Storage Quantity100 ProductsWorking FrequencyMultiple Frequencies(High/Medium/Low)Conveyor Speed28 m/min (50Hz), 34 m/min (60Hz), adjustable speed motor as optionBelt Height from Ground730mm(±20mm micro-adjustment), can customize other heightConfiguration MaterialStainless Steel 304Belt TypeFood Level PVC Belt, White ColorCounting FunctionYesPower Supply, VoltageAC200~230 V±10%, single phase, 50/60 HzEnvironment Temperature-10 ºC ~40ºCAlarm PatternAlarm Buzzer and Belt Stop(Standard) or Reject System(Optional)NoteThe above sensitivity is tested by standard testing piece in empty running conveyor, while the actual sensitivity with products will depend on the type, shape, feature, status of the products, position of the mixed impurity and environment factors etc.
: The Sellers warrant that the Commodity will be free from defects in materials and workmanship when it is used properly and in accordance with the directions of use for the commodity for a period of 12 months counting from the 15th day of arrival at the destination or the date of arrival at the end users premises, whichever comes first. The remedy for breach of warranty shall be limited to replacement of defective parts only (mechanical and electrical). Consequential damages for breach of warranty where the claimed loss is commercial are excluded. There are no expressed warranties beyond the stated in writing.NoItemQuantitySpecification1Main Machine1 unit2Open Spanner1 unit24x273Allen Wrench2 unitM54Synchronous Belt2 piece5Testing Block3 setsFe, Non-Fe, Sus6Operation Manual2 piece
Photos