Medical Incinerator

1.Pathological waste: The human body waste generated in the course of treatment and medical test animals, including the body tissue generated during surgery, human waste tissue, pathological wax block after the pathological section.
2.Infectious waste: Carrying pathogenic microorganisms Medical wastes that have a risk of transmission of infectious diseases, including those contaminated with blood, body fluids, excreta, wastes from infectious disease patients, etc.
3.Injury waste: Refers to the medical Sharp instrument can be stabbed or cut the body , including medical needles, scalpels, scalpels, glass tubes, etc.
4.Drug waste: overdue, obsolete, metamorphic or contaminated waste drugs, including discarded generic drugs, discarded cytotoxic drugs and genotoxic drugs;
5.Chemical waste: Toxic, corrosive, flammable and explosive chemical waste, such as obsolete chemical reagent, chemical disinfectants, mercury sphygmomanometer, mercury thermometer, etc.
WFS series domestic (medical) garbage incinerator is provided with the currently most advanced incineration way, i.e., primary pyrolysis gasification + co-firing of surrounding wind +secondary incineration +burnout treatment.
The primary incineration chamber of this incinerator is provided with the gasification incineration technique, which makes temperature inside incineration rise from 200ºC to 400ºC.The problem such as clinker, residue and sintering will never happen in the process of garbage incineration.
The secondary incinerator and toroidal air supply device are set inside the secondary mixed incineration chamber. The combustible gas in the smoke will be burnt fully under high temperature, which can burn the gas generated by the gasifier and air fully and effectively by mixing them and prevent the overflow of the carbon substance in gas and late incineration.
The smoke enters the high-temperature incineration chamber tangentially and combustion-supporting air also enters it in a tangential manner, making the smoke incinerate fully again in the incineration chamber. The flue gas dust removal is made by the swirling air flow. The retention time of incineration smoke in the incinerator is greater than 2s, so that the combustible gas in smoke and the combustibles in the flying ash burn fully.Dry tail gas purification device is set in the upper part of the incinerator so as to absorb the chlorine hydride and oxysulfide generated by incineration. The odor in smoke will be decomposed under the high temperature.
The smoke purification system is provide with calcium hydride filter brick which will be involved in neutralization reaction with the acid gas in order to absorb the acid gas and purify the tail gas. The harmful components of the smoke are decomposed below the value specified in the national standard "Pollution Control Standard for Hazardous Wastes Incineration (GB18484-2001)".
Item
Model
WFS-30
WFS-50
WFS-150
WFS-300
WFS-500
Burning capacity
20-30kg/time
(3-6time a day)
30-50kg/time
(3-6time a day)
100-150kg/time
(3-6time a day)
200-300kg/time
(3-6time a day)
300-500kg/time
(3-6time a day)
Incineration size
(m)
(L X B X H)
1.45 X 0.9 X 1.75
1.8 X 1.15 X 3
2 X 1.4 X 3.5
2.2 X 1.55 X3.8
3 X 2 X 4.8
Garbage inlet size
(mm)
480 X 600
620 X 800
760 X 960
900 X1100
1080 X 1280
Chimney
(mm)
Outer diameter
Φ280
Outer diameter
Φ280
Outer diameter
Φ300
Outer diameter
Φ400
Outer diameter
Φ460
Induced draft fan
0.37KW
0.37KW
0.55KW
0.75KW
1.1KW
Combustion-supporting device
Power 0.11kw,
fuel consumption
4-6kg/h
Power 0.11kw,
fuel consumption
4-10kg/h
Power 0.11kw,
fuel consumption
5-12kg/h
Power 0.22kw,
fuel consumption
7-14kg/h
Power 0.22kw,
fuel consumption
7-14kg/h
Reburning device
Power 0.11kw,
fuel consumption
4-6kg/h
Power 0.11kw,
fuel consumption
4-10kg/h
Power 0.22kw,
fuel consumption
7-14kg/h
Power 0.37kw,
fuel consumption
10-20kg/h
Power 0.11kw,
fuel consumption
15-26kg/h
Operating voltage
380V or 220V
380V or 220V
380V or 220V
380V or 220V
380V or 220V
Weight (kg)
2300
4000
7000
8000
13000
Zhucheng Hongli Shengde Environment Science and Technology Co., LTD., is a high-tech enterprise integrating production and R&D.
Now the company is member unit of China Association of Environmental Protection Industry (CAEPI), council unit of Weifang Association of Environmental Protection Industry, and teaching practice base of Qingdao University of Science &Technology. We have long-term cooperation with Tsinghua University, University of Shanghai for Science and Technology and other famous domestic universities and institutes. We have obtained multiple national utility model patents and passed ISO9001: 2008 quality management system certification. We have high non-standard design, manufacture and service ability with comprehensive testing and detective equipments, complete product specifications reliable and stable quality and customization support. The solid-liquid separating machine developed jointly with Jilin Agriculture Committee has been widely used and promoted.
With the constant development and innovation, our products win a broad market throughout China and have been export to European, American and Southeast Asia regions