Mei-58 Magnetic Incremental Encoder Be Customized

MEI-58 magnetic incremental encoder is by design, a rugged cost-effective industrial grade product that uses magnetic technology to address the weakness of the more frangible optical encoder counterpart. Intended for low resolution applications, it functions as an incremental angular position encoder when used with a multi-pole permanent magnet target wheel. Direction of rotation can be obtained from the two output channels that are 90° electrically out of phase. The final PPR count can be selected by magnetic pole count of the permanent magnet target. high performance, cost-effective 1Vpp Sine/Cosine output magnetic encoders for harsh or difficult environments.
Features:Magnetic Encoder Pulse Counts up to 3560 Counts per Channel
2 Channel Quadrature Magnetic Encoder Channels
Designed to be used with a P44 Magnet Target Wheel ()
Low Profile Housing of only 1.9 inches
Working Temperature range -40 to 125 ºC
Rugged Aluminum Housing
Through Hole or Blind Hollow Housing Available
Non-slotted Bolt Hole Pattern upon request
Available with or without internal pull resistors
Single-Ended or differential outputs for ABI
U/V/W commutation outputs(Open-collector or differential)
8 to 8192 pulses per revolution (PPR)
Powered from external +5VDC/24 VDC/12 VDC power supply
Current consumption low to 50mA
Max speed to 30000 RPM
Operating temperature of -40 to +85 ºC
Allows for a variety of solid shaft, hollow shaft and blind hollow shaft
ModelMEI 58Incremental EncoderOutput electrical specificationsResolution ratio(P/R)4096Control outputOutput code/output angleRefer to output waveformPNP open collector outputOutput voltage:Min(supply voltage-1.5)Vdc,
load current:Max:80mANPN open collector outputload current Max :80mA,
residual voltageMax:1VdcTTL voltage outputload current Max :80mA,
residual voltageMax:0.4VdcAnalog voltage output0-5V analog signalAnalog current output4-20mA analog signalResponse time (rise/drop)≤1μSresponse frequency ( max)100 kHzSupply voltage5Vdc±5% (wave P-P:Max.5%),
12-24Vdc±5%(wave P-P:Max.5%)Consumption currentMax. 35mA( non-loaded)Insulation resistanceMin 100M Ω( based on 500Vdc)Insulation strength750Vac 50/60Hz, 60S duration(between terminals and housings)ConnectionRadial or axial shielded cable exitMechanical parametersStart torqueMax: 5x10-3 N.mInertia torque9.8x10-8 kg.m2Shaft loadRadial 20N , axial 10NShaft position deviationRadial≤0.1mm , axial≤0.2mmallowable speed (max)5000rpmEnvironmental parametersOperating temperatureºC-10~70 ºC (non frozen),Storage temperatureºC-25~85ºCHumidity %RH35~90%RHProtection gradeIP54 -IP65Cable1M long, shielded cable