Metal Deck Roll Forming Machine

Product feature
The metal produced by this machine has high strength with big wave length. It adheres well to concrete. Used on high building, it not only saves steel model plate, but also reduce the weight of the storey. With the same bearing capacity, it economized steel and cuts down investment accordingly.No.itemParameter(allissubjecttoourfinaldesign)1
SuitablerawmaterialTypeCommongalvanized&pre-paintedsteelYieldstrength235MPa(orotherhighstrengthsteel)Thickness(mm)0.4-0.7width(mm)Accordingtofinaldesign2Manualuncoiler'scapacityMax.5tons3Formingspeed(m/min)about18-20m/min4Mainmotorpower(KW)7.5kw5Hydraulicpower(KW)3kw6FormingrollergroupsAround19-20groups7RawmaterialofformingrollerHighqualityNo.45steel8RawmaterialofcuttingbladeCr12mouldsteelwithquenchedtreatment9controllingsystemMitsubishiPLC&converter10SuitableindustrialvoltageAccordingtoyourspecialrequirement11Machinedimensions(L*W*H)6.8mx1.8mx1.52m12Machineweightabout9-10tonsMachine component
Deck forming machine consist of uncoiler, coil sheet guiding device, main rol forming system, cutting device, hydraulic station, PLC control system and support table.
metal Building Material, YX51-240-720 Floor Deck(steel floor decking)
Merits:
1 light weight
2 high strength
3 high loading capacity
4 easy for installation/construction
5 much better than traditional ones
6 excellent appearanceDescription:
Floor Decking Steel Sheet is roll formed by roll forming machine, mainly using galvanized steel, at thickness of 0.8/1.0/1.2mm. Simple shape with high rib and high strength. Put the plate above the welded wire net, fill cement between them. This panel is usually used as the floor of high buildings, it can save steel mound and can also save the weight, in the same loading capacity. Use this plate, and save the steel quantity, and thus save cost.We also do our best to customize our products to your requirements.1Suitablematerial
colorsteelsheetorgalvanizedsheet
2Thicknessofrawmaterial
0.8-1.2mm3Uncoilerloadingcapacity5000kg(canbeincreasedto10ton)
4Workingspeed
12-15m/min5Voltage380V,3phase,50Hzoraspercustomer'srequirements
6PowerrequirementMainmotorpower:18.5KW(Dependonfinaldesign)
Hydraulicstationpower:5.5KW(Dependonfinaldesign)
7ControllingsystemMitsubishiPLC&converter
8Machine'ssizeabout28m*1.5m*1.6m(Dependonfinaldesign)