Micro Reed Switch

Breif information ofMicro Reed Switch:Micro Switch controls of "On and Off" action. It is easy to manipulate the applications. We could provide you our high quality Microswitch products. Just take one simple action, you can set up all your electronic equipment. All our micro switches are activated by leaver or button. If you like some special forms, please contact us for further custom switches. We, Xiamen Universal Electronic Co., Ltd make our 16A Micro Switch to fit kinds of your max-needs.Function and Characteristics:*Long life, high reliability.
*Safe reliable basic switch.
*Variety of levers and connect terminals.
*A variety of models with low operating force to high force are sensitivity.
*Nice appearance, tight configuration, characteristic, quick action and high sensitivity.
*Widely used in home applicances, or other automatic devices, etc.Production Workflow and Automatic Machine:
Why Choose Us?
Xiamen Universal Electronic Co., Ltd,is a professional company of switch control device and semiconductor component separator, shutter motors etc electrical appliance company. After years of efforts of all colleagues, the support of customers and suppliers, we now have the business department of the electronics switch and Integrated Department of Market Operation. The business department of the electronics switch is engaged in R & D and manufacturing of the medium and small electronic switches; The Integrated Department of Market Operation is responsible for the Integration Services of information gathering, selling, trading and so on. Our products cover a wide range, including micro switch, tact switch, push switch, metal dome switch, relay, low-voltage devices, rectifier bridge, ect. Those products are widely exported to more than 40 countries all over the world.
Xiamen Universal Electronic Co.,Ltd
No.318. South Tongji Road, Jimei District, Xiamen City, Fujian,China
Mobile: 86-15606003688
Tel: 86-592-5782488
Fax: 86-592-5664223ItemValueOperating Speed0.1mm~1m/s(Related with actuator forms)Operating FrequencyMechanical 60 cycles/min; Electrical 30 cycles/minInsulation Resistance> =100 ohm(500VDC)Contact resistance< =30ohm(Initial value)Test VoltageBetween terminals of the same polarirtyAC1000V, 50/60Hz, 1minBetween current-carrying metal
And ground(case), and between
Each terminal and non-carrying
metal parts
AC3750V, 50/60Hz, 1minVibration resistance10-55Hz, 1.5mm Double amplitude
Shork ResistanceDestruction:
OF> 0.5N: 1000m/s ² (approx. 100G)max
OF< =0.5N: 500m/s ² (approx. 50G)max
Malfunction:
OF> 0.5N: 300m/s ² (approx. 30G)max
OF< =0.5N: 200m/s ² (approx. 20G)maxLife ExpectancyMechnical> =5000000 cycles
Electrical> =50000 cyclesDegree of protectionIEC IP67Degree of protection against electric shockClass IPTI(Tracking Resistance)175Ambient air temperature125degree60%RH below(No ice and dew)Ambient air humidity85% Rhbelow(about +5~+35degree)WeightApprox. 5.95g(No lever)Notes: Shows the operating force of no lever
1.
Degree of
TemperatureNo Mark: T125
5.
Terminal TypesA: 250 Quick-connect Terminal
B: 187 Quick-connect terminal(Thick: 0.8)
C: 187 Quick-connect terminal(Thick: 0.5)
D: Solder/187 common terminal
E: Screw terminal
F: Solder terminal
G: 250 Quick terminal No. 2
Y: Not standard terminal
2.
Ratings
16: 16(4)A250VAC/16A125VAC
1/2HP 125/250VAC
10: 10(3)A250VAC/10A125VAC
6: 6(2)A250VAC/6A125VAC
1: 1(1)A250VAC/1A125VAC
6.
(max)
Operating Force051: 0.5N
025: 0.25N
050: 0.5N
100: 1N
150: 1.5N
200: 2N
300: 3N
400: 4N
3.
Connect Forms
1A: SPDT
2A: SPST-NO
3A: SPST-NC
7
Plunger specsNo mark: Standard Plunger
A: Middle Plunger
B: Long Plunger
C: Abnormality Plunger
( see dirgram )
Notice: If adopt other not standard plunger, the indicate with the new spec(confirmed by our company)
4.
Acuator forms0: No lever
A 1/1: Short lever
A 2/2: Long lever
A 3/3: Middle lever
A 4/4: Short Roller
A 5/5: Long Roller
A 6/6: Arc lever
A 0/0: Not standard leverNote:
1) A indicate the lever near to the
Plunger, no A indicate the lever far
Away from the plunger.
2) If lever is amounted besides, add letter" B" after the lever code.
3) 0 Indicate not standard lever
8.
Additional Specis Numbers
Apply to:1)When used not standard parts such as not standard terminals;
2)When Customer has particular Operating value or other requirement
3) When the case is mot black, for example, grey shows as G.
Additional specs number shows by Arabic numerals or Latin. color code after the numbers. If there is no Additional numbers, the place is vacant