Mutiple Cartridge Filter Dust Collector/Centralized Welding Fume Extraction for Air Cleaning System

Mutiple Cartridge Filter Dust Collector/Centralized Welding Fume Extraction for Air Cleaning SystemLB-PC multi-cartridge dust removal equipment is a kind of efficient and energy conservation equipment, which is modularized andsystematic produced combining with advanced technology power accoording to our conclusion of design and practical experience . It is widely used for dust purification in mechanical processing, chemical, construction, materials, pharmaceutical, electronics, wood processing industry, etc.
Facility principle:
Dust-laden air goes into dust collector from the top or the side import, the dust is "closured" by cartridge appearance and gathers together. The purified air is discharged out from the cartridge center, which achieve the purification purpose. In order to clean the cartridge, making use of compressed air (0.6-0.7Mpa) to produce a strong air current, which release into the cartridge center through the electromagnetic valve, and oscillate and blow down the dust accumulated on the external surface of cartridge as the vibration waves. The dust fall down in the ash bucket in the following. In order to ensure the cartridge works normally and continuously, dynamic change dust, the PLC control system blow conversely.
Features:
1.small volume, small footprint, saving space;
2.high efficiency of cleaning; Purification rate is more than 99% on the particles bigger than sub-micron.
3. using imported cartridge of the United States as main part with a long service life;
4.
reasonable structure, easy for maintenance, low-cost; convenient for cartridge replacement without any tools;
5. Energy-saving, running resistance is 500-800pa, initial resistance is 200pa,and the maximum resistance is 1500pa.( according to the air pressure of fan)
6.inported PLC control adjustable pulse blowing conversely, equipped with import pressure indicator;
7. Series horizontal cartridge, a single seal to ensure the safety of equipment operation and easy for maintenance;
8. flexible box composite element can be installed to meet different site conditions;
9.a variety of cartridge material can be choiced for users, including high temperature resistant, anti-moisture, flame retardant and so on.
Technical Parameter:ModelAirflow(m³/h)Filter qtyValve typeBody size(mm)LHWdiaLB-PC-1212000-1500012DMF-T-40196027701362550LB-PC-1616000-2000016DMF-T-40196027701960650LB-PC-2021000-2500020DMF-T-40196027701960700LB-PC-2424000-3000024DMF-T-40392027701362750LB-PC-3232000-4000032DMF-T-40392027701960850LB-PC-4041000-4800040DMF-T-40392027701960900LB-PC-4850000-5700048DMF-T-405880277019601000LB-PC-6060000-7000060DMF-T-405880277019601200
LB-CY Cartridge Filter Dust Collector
Technical Parameter:
Model
Airflow
M3/H
Power
KW
Cartridge Q'ty
Valve Q'ty
Weight
Size
mm
LB-CY-4
2200-3000
3.0
4
4
456
1440*1808*1050
LB-CY-6
3500-4500
5.5
6
6
592
1800*1808*1050
LB-CY-8
4800-6500
5.5
8
8
672
2210*1928*1050
LB-CY-12
7500-8600
7.5
12
4
1105
2250*2077*1400
LB-CY-15
8900-9750
11
15
5
1301
2950*2077*1400
Specifications:
This facility is designed integrated, of tight structure, small footprint, electrinic system with PLC auto-controlled and easy operation.
This type dust collector equipped with high vacuum fan but with low noise.
imported soft hose, heat and abrasion resistance, smooth inside wall lowered the wind resistance.
LB-GD high Vacuum welding Dust Collector
Application Place:
High vacuum model dust collector mainly applied to purification dry, no oil, no corrosion of the smoke gas during welding, cutting and grinding process, can connect with the Robot arm for the operation condition of the robot welding.
Technical Parameter:
Model
Airflow
M3/H
Power
KW
air intake
Mm
Voltage
V/HZ
Pressure
pa
Size
mm
LB-GD-300
260~350
2.2
Φ75
380/50
23000
1200*720*1250
LB-GD-520
460~550
7.5
Φ100
40000
1760*720*1520
LB-GD-1000
1000-1200
18.5
Φ150
30000
1950*870*1800
LB-GD-2000
1800~2000
25
Φ200
31000
2000*900*1800
LB-GD-2500
2100~2500
29
Φ250
27000
2100*950*1800
Product Advantage:
This kind of filter with low noise high negative pressure fan, not only with low noise,but also produce quite high negative pressure. Can connect to multiple station convulsions dust removal at the same time.
The equipment adopts the integrated design, compact structure; cover asmall area l, and electric control system use PLC for automatic control, easy to operation. The high pressure dust removal system adopts imported and heat-resistant, wear-resistant high pressure composite suction hose, its inner surface smooth wind resistance losses small.
According to the different work station requirements, its methods of catching dust can be used in ahigh pressure suction mask, universal environmental protection welding torch, grinding wheel.
LB-DY All-in-one Bag Dust Collector
Working principle: The dust from the dust source go through the dust hood and air pipe inlet into the box body, because of the airflow velocity plummeted, sudden expansion, large dust particle size under the action of its weight, separated from the air and into dust drawer. The rest of the dust particles due to the filter bag's collision, hook, electrostatic effect, stranded on the inner wall of the filter bag, after purification, the air is being exhausted from the outlet.
Technical Parameter:
Model
Airflow(m³/h)
Power(Kw)
Cartridge Bag Q'ty(pcs)
Valve Q'ty
Weight(KG)
Size(mm)
LB-DY-16
960-1050
0.75
16
4
252
830*1100*2200
LB-DY-20
1100-1300
1.5
20
5
285
1010*1100*2200
LB-DY-24
1400-1600
1.5
24
6
315
1190*1100*2200
LB-DY-28
1800-2000
2.2
28
6
345
1370*1100*2200
LB-DY-30
2100-2300
2.2
30
6
712
1810*1367*2378
LB-DY-40
2400-2750
3.0
40
8
790
1990*1370*2378
LB-DY-48
3000-3300
3.0
48
8
845
1990*1550*2378
LB-DY-56
3500-3800
5.5
56
8
951
1990*1730*2378
LB-DY-63
4200-5000
5.5
63
9
992
2170*1730*2378
Company information:
Qingdao Loobo Environmental Protection Technology Co.,Ltd is one of the biggest enviromental protection products manufacturer, located in Qingdao city of china,specialized in alll kinds of portable fume extractor, downdraft benches(grinding dust removal worktable), central fume purification system, flexible suction arm,etc.
We have more than ten years export experience ,all of our products with the ISO9001 and CE certification, the quality can be guaranteed.
We have our own R&D department ,have avariety of style range to meet any of your requirments and had established the economies of scale, so can dilivery fast and provide can beat your competitor's price.
Best Regards
Miss JunoQingdao Loobo Environmental Protection Technology Co.,Ltd
Factory Address: No.19, Hechuan Road, Licang Industry Park, Qingdao, ChinaPhone: +86-15865519554Fax: +86-532-8068 7573
Website:
www.looboqd.com(English version)
www.loobo.cn (Chinese version)