NDT Dye Penetrant Inspection

dye penetrant inspection
DPT-5 NDT Dye Penetrant Inspection Materials
Quick drying, quick indication
High sensibility
Non-poison, harmless
Solvent remove
Features:
L Quick drying, quick indication.
L Solvent removable, or water removing first and solvent removing afterward.
L Low content of fluorine, chloride and sulfur. Suitable for surface flaw detection of austenitic stainless steel.
L High sensibility.
L Non-poison, harmless, without strong stimulation order organic solvent
L imported COSTER valve and nozzle. The luster well-distributed and covered widely on work piece. The nozzle of P, R. D can be changed to each other.
Application:
It can be widely used in chemical industry, shipping industry, power industry, aviation industry, engineering, metallurgical industry, engineering, metallurgical industry, automobile, petrol industry, railway, etc.
Packing:
L Aerosol can(500ml): 6can/set
L 18L liter can(bulk packing)
Usuage:
Clean the workpiece surface with Remover.
Spray Penetrant on the workpiece surface and keep wet of 5-10 minutes.
Clean Penetrant on the workpiece surface with Remover.
Shake Developer until well-distributed, then spray it from 150~300mm.
Flaws will be revealed.
Remove developer with Remover.PenetrantRemoverDeveloperAppearanceDark-red liquidColorless transparent liquidWhite suspensionSpecific graviy0.88±0.010.69±0.010.81±0.01Corrosive Properties(g/ml)No evidence of corrosionFlash pint / '' C25-6-6WashabiltyEasy to washSensitivity≥level 1To be used with DPT-5 penetrant
StabilityQualifiedViscosity/mm 2 /s3.8±0.31.511.03Re-dispersing property--Easy to disperse