New Plastic Materials Alis Tpa

PRODUCT INTRODUCTIONS
1This product is a new type of covering material used for covering and vulcanizing rubber tubes. It is especially suitable for the coating and vulcanization of EPDM rubber and all kinds of synthetic rubber tubes. It is easy to peel off, non-adhesive, with a bright appearance.
2 Because the product density is greater than TPX, it can be used directly after crushing without granulation, and will not form bridging etc. in the hopper. Its use method is exactly the same as that of Mitsui's TPX in Japan and can completely replace Mitsui's TPX .
PRODUCT ADVANTAGE
Its use frequency is higher than that of Mitsui's TPX, with low cost and stable quality. It is an ideal product to eliminate or replace TPX.
SPECIFICATIONSdensity0.912g/cm3melt flow rate25g/10minyield(23ºC)18Mpaelongation rate45%bending strength21MPaheat distortion temperatrue80ºCfusing temperature260-280ºCrefractive index2.32transparency75water absorption0.03%
APPLICATIONS
It is especially suitable for the coating and vulcanization of EPDM rubber and all kinds of synthetic rubber tubes.FACTORY
Packing
25 kg PP woven bag or 500 kg / 550 kg supre sacks.
Storage
To avoid blocking, bags should be stored in the dry and ventilated warehouse with stack height no more than 10 bags and avoid solarization, damp and takes strict precautions again stress. shelf life is theoretically unlimited when storage is under proper conditions.Transportation
This material is non - dangerous goods for land, air and marine transportation.