New design mine safety clothing chemical protective suit chemical suit

New design mine safety clothing chemical protective suit chemical suit

Product Description

FFF02 split anti-virus clothing

Characteristic:

1. Cotton polyester, lined with carbon fibers, dual-purpose military and civilian; which is composed of jacket jacket and trousers and matched with anti-virus gloves, anti-virus boot covers, etc.

2. It can effectively prevent various vapor-like and small droplet poisons from harming human body for more than 6 hours.

3. It has the functions of chemical prevention and burning, and weighs about 1.7 kg.

4. The inner flaps of jackets and trousers are specially designed for anti-leakage, The the working environment is -35 ~40 ~C. When the temperature is lower than 20 C, the anti-virus clothing does not increase the Physical exertion of the wearers, and the anti-toxicity performance of the clothing is not easy to lose. It can be worn for a long time to prevent nuclear radiation, biology and chemistry.

Scope of application

Environment for the presence of hazardous or sensitive substances or for the treatment of pollutants

Adopting the Standard GJBZ063-94General Specification for Isolated Anti-stripping Clothing

Note: Clothing fabrics can choose camouflage and desert colors according to the users'needs.

I. Use and Performance

The anti-virus clothing is a dual-purpose skin protective equipment for military and civilian use, which has the functions of anti-virus, flame retardant and so on. It is matched with gas mask, gloves and boots. It can effectively prevent the harm of various vapor-like and small droplets of poison to human body. It has a certain flame retardant effect on the flame. Anti-virus clothing weighs about 1.7 kg. It can effectively defend against vapor-like and small droplets of poison for more than 6 hours. After wearing and rinsing, the anti-toxicity performance decreased slightly, but as long as the carbon surface did not fall off seriously and bleach, it could still effectively prevent vapor-like and small droplets of poison for more than one hour. Anti-virus clothes consist of capped jackets and trousers. The inner flaps of jackets and trousers are specially designed to prevent leakage of poisons,special attention should be paid to the flattening of the inner flaps when wearing them. The trousers are tightened with adjustable elastic bands.

2. Use time and wearing time limit

When the temperature is lower than 20 C, the anti-virus clothing does not increase the physical consumption of the wearers, and the anti-toxicity performance of the clothing is not easy to lose, so it can be worn for a long time. In hot summer season, in order to reduce the physical consumption of personnel and protect the anti-toxicity performance of anti-virus clothing, the wearing time should be shortened as far as possible.

3. Usage

1. Open the plastic bag, take out the anti-virus clothes, and take out the plastic film in the clothes.

2. Wear anti-virus clothes outside summer or winter clothes.

3. The order of dressing is to wear trousers first and then jacket. When closing the front of the pants, first pull the inner flaps to the right, using the order of bottom-up closure. When closing the front of the jacket, first pull the inner front to the right, pull the zipper up to the strength, and press the nylon buckle.

Cautions in Use

1. In order to protect the adsorptive performance of anti-virus clothing, it is necessary to avoid contact with volatile oils and organic vapors as far as possible after wearing anti-virus clothing.

2. Anti-virus clothing can not be used as fire protection clothing.

3. Anti-virus clothes can be rinsed and dried with clear water, and should not be rubbed during rinsing to protect the carbon layer. Anti-virus clothes can withstand at least 4 rinses.

4. The cracks and unsewn threads that occur during normal wear should be mended in time. If there are hook breaks or severe local wear, you can use the same kind of material to repair them.

5. Because of serious wear and tear, the carbon surface should be discarded when it turns white or the carbon layer falls off seriously.

6. When conditions permit, the antivirus clothes should be replaced once used in the areas where liquid poisons are contaminated. If conditions do not permit, it is allowed to continue to wear, but it must be disinfected with solid disinfectant powder or other methods.

7. Toxic clothing can be destroyed by incineration.

Notices in Custody

1. Establish a responsibility system, the user is the custodian of the anti-virus clothing .

2. Anti-virus clothing should be stored in a dry and ventilated room. Avoid placing it in the same warehouse as inflammable, explosive, corrosive or organic liquids,etc.

3. After taking off the anti-virus clothes, we should avoid approaching the fire source and lay them as flat as possible. Do not litter or jam in order to avoid damage to the carbon layer affecting the anti-toxicity performance.

Detailed Images

Related Products

Company Information

Certifications

OEM Service

Our Service:

1.Folliowing a strict production shedule to sure on-time deliveries.

2.OEM orders welcome.

3.Can come to sample processing,Can undertake large quantities of emergency order.

4.Undertake to build production line services.

5.Have a good reputation and after-sale system.

6.Sample order in stock, and bulk production depends on quantity

7.You can pay for the order via:T/T,L/C.

8.We have strong cooperation with DHL.TNT.EMS. You also can choose your own shipping forwarder.

Our Promise:

1.Your inquiry related to our products or prices will be replied in 24hrs.

2.Well-trained and experienced staffs to answer all your enquires .

3.OEM&ODM, any your customized products we can help you to design and put into product.

4.Protection of your sales area, ideas of design and all your private information

5.Before complete the products,we'll send the picture to customer,and we will test the products' quality also.

Packaging & Shipping

FAQ

Q1. Are you the manufacturer or the trading company?

We are the direct manufacturer.

Q2. Why we choose you? what is your strength?
We are experienced and professional, we offer high quality products, perfect services and competitive price.

Q3. What is your delivery time?
Normally, after your deposit, we could finish the production within 7-30days.

Q4. What is your payment methods?
T/T, L/C, Paypal, West Union, Cash

Q5. about the samples terms:
The samples cost and freight need to be covered by you.
We will refund when you place the formal order according to sample cost and the totalamount of the order.

Q6. Can you customize the products as per our requests?
Yes, we offer OEM and ODM services.
a. Silk Print Logo on the product
b. Customeized products housing
c. Customized packing.
d..Can come to sample processing,Can undertake large quantities of emergency order.Q7. After Sale Service:
a. All products will have been strictly Quality Control in workshop before packing.
b. All products will be well packed before shipping.

Back Homepage >>