Non-invasive Ventilator Sleep Apnea Therapeutic Device - BiPAP

Introduction

The Introduction of Non-invasive Ventilator

The BiPAP is bi-level continuous positive airway pressure device that mainly
used for home care and clinical treatment of obstructive sleep apnea-hypopnea
syndrome (OSAHS) or respiratory insufficiency.
The Device can be set respectively the IPAP (inspiratory positive airway pressure) and the EPAP (expiratory positive airway pressure).It performs the therapy through the corresponding airway pressure set by professionals according to different degrees of users’ apnea when in use and it runs continuously.
The humidifier cooperates with the host to provide the user with a air of suitable temperature and humidity to avoid drying of user’s nasal mucosa and make comfort treatment. The host controls the humidifier’s turning on/off, the principle of which is to heat the water in the chamber and make the air inhaled by the user with suitable temperature and humidity.

Please contact Niki for more details.

Feature

The Feature of Non-invasive Ventilator

Buttons
1. ON/OFF button: It may turn on or off the device and close alarms. If the device is connected to the power, the ON/OFF button indicator will be on.

2. Shuttle flying: It can be rotated clockwise/counterclockwise or be pressed. When it is rotated clockwise, it may move to the next settings on the current interface or enlarge the parameter or come to the next parameter. When it is rotated counterclockwise, it may move to the previous focus on the current interface or diminish the parameter or come to the previous parameter. Press the shuttle flying, it may perform the functions indicated by the current focus, or enter / edit the interface//confirm/i.

Display Screen
A LCD display screen is adopted to mainly display the current parameters and
states for the user and operator. Please refer to Chapter 3 Device Operation for more
interface operation.

Power Adapter, Power Port, Data Port, USB Port and USB Cable

1. The power adapter is mainly to transfer the external power supply into the voltage and current required for the device operation.

2. The data port is mainly for software updating and maintenance by the manufacturer.

3. USB port and cable. The operator may connect the device via a USB cable to get the data of the user.

Humidifier
The humidifier is to provide users with comfort airflow by heating the water in
the water room. Please turn off the humidifier when you need not it. Better use the
recommended accessories by manufacturer otherwise it may cause air leakage.

Power Outage Alarm
During the running state, the exhaled air may be re-inhaled by the user in case of
any power outage happens. To avoid this phenomenon, when power outage happened
the system will provide a buzzing alarm and it will last for 30 seconds. During the
alarm, press the ON/OFF button, or connect the device with power again, the alarm
will stop. After connect the device with power, the system will enter into the normal
working state.

Technical Datas

Environmental Specifications

Working Environment

Storage Environment

Temperature

5℃ to 35℃

-20℃ to 60℃

Humidity

15% to 95% (no condensation)

15% to 95% (no condensation)

Atmosphere pressure

77 to 101kPa

Inapplicable

Physical Specification

Dimension

255mm*170mm*112mm

Weight

1.8Kg

Water capacity

MAX 200ml

Parameter Scope

Pressure

4~ 20cmH2O (±1cmH2O) with a 0.5cmH2O increment

IPAP

EPAP

ISlop

1-6 level

Esens

1-6 level

BPM

4-40BPM

InspTime

0.5-3.0s

Ramp

0-60 min

EPR

0 level Close EPR
1 level setting pressure -2cmH2O

2 level setting pressure -3cmH2O

3 level setting pressure -4cmH2O

0 gear close the humidifier
1 level 45℃

2 level 50℃

3 level 55℃

4 level 60℃

5 level 65℃

System time

24-hour

Main Picture

The Main Picture of Non-invasive Ventilator

Certificates

Please contact Niki if you want to purchase it.