OEM ODM 18 Port Long Distance 100/1000Mbps Ethernet Switch with 16*100m RJ45 Port+ 2 Gigabit Uplink

18-Port 100/1000Mbps PoE Switch
POE31016PL
OVERVIEWONV-POE31016PL series is ONV independent research and development of the non managed PoE switch .16*100M RJ45 port and 2*Gigabit uplink ports. Port 1-16 support IEEE 802.3af/at standard PoE power supply, single-port PoE power up to 30W. PoE output total power is 200W, As a PoE power supply device, it can automatically detect and recognize the power-receiving devices that meet the standards and supply power through the network cables. Power supply for PoE terminal equipment such as wireless AP, web cameras, VOIP phones, and video door intercoms can be powered by network cables to meet the demand for high-density PoE power supply network environment. It is suitable for hotels, campuses, factory dormitories, and small and medium-sized enterprises to set up an economy. Efficient network.Non-network management models, plug and play, no configuration, easy to use.
FEATURE10/100M Access , Gigabit UplinkAll Series supports 10/100M RJ45 Port + 10/100/1000M network Port, with feature of high flexibility.Support non-blocking wire speed forwardingSupport full duplex based on IEEE802.3x and half duplex based on BackpressureIntelligent POE Power Supply Function16*10/100M base-TX RJ45 PoE ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage and other scenarios.Comply with IEEE 802.3af/at PoE power supply standard, automatic identification of PoE equipment for power supply, no damage to non PoE equipment. The maximum PoE output power of the whole machine is 200W, and the maximum PoE output power of single port is 30W.The PoE port supports priority mechanism. When the residual power is insufficient, the power supply of high priority ports is guaranteed, so that the equipment is overloaded.Sup-Creative function designLong distance gear: when opening, the 9-16 port rate is reduced to 10M. Using the existing twisted pair wire, it can break through the restriction of the transmission of the twisted pair line and reach the distance of 250 meters at the farthest distance; on the other hand, the problem of transmission failure caused by the line aging can be solved.The Equipment Is Stable And Reliable,Easy To UseThe host has low power consumption, no fan mute design, and metal case to ensure stable operation of the product.It uses high redundancy design to provide stable POE power output for a long time.The equipment meets the national CCC standard and is in full compliance with the safety requirements of CE, FCC, and ROHS. It is safe and reliable to use.The user can easily understand the working status of the device through the power indicator (PWR), port status indicator (link/Act), and POE operation indicator(POE).Plug and play, no configuration, simple and convenient.Support desktop and 1U-19 inch cabinet installation.
TECHNICAL SPECIFICATIONModelONV-POE31016PLONV-POE31024PLEthernet port16*10/100base-TX POE Ports (Data/Power)
2*10/100/1000base-TX Uplink RJ45 Ports (Data)24*10/100base-TX POE Ports (Data/Power)
2*10/100/1000base-TX Uplink RJ45 Ports (Data)POE PortPort 1-16 support IEEE802.3af/at standard POE power supplyport 1-24 support IEEE802.3af/at standard POE power supplyFunctional Switch1*(Extender)After opening, port 9-16 support 10M/250 meter long distance transmission.1*(Extender)After opening, port 17-24 support 10M/250 meter long distance transmission.Note: when the switch state changes, it must be restarted before the switch function can take effectNetwork ProtocolIEEE802.3 10base-T; IEEE802.3i 10base-T;
IEEE802.3u 100base-TX;
IEEE802.3ab 1000base-T;
IEEE802.3x POE StandardIEEE802.3af/atEthernet Port Feature10/100 baseT(X), 10/100/1000 baseT auto-detection, full/half-duplex MDI/MDI-X auto-sensingForwarding Modestore and forward(Full Wire Speed)Switching Capacity14.8Gbps (Non-blocking) Forwarding Rate@64byte5.36Mpps6.55MppsMAC address entry16KBuffer Memory4MUTP Transceiver10base-TX : Cat5 or later UTP(≤250 meter)
100base-TX : Cat5 or later UTP(≤100 meter)
1000base-T : Cat5e or later UTP(≤100 meter) Power Pin AssignmentDefault 1/2(+), 3/6(-);Optional 4/5(+), 7/8(-)MAX / AVERAGE Power Per Port 30W/15.4WTotal PWR / Input Voltage200W (AC100-240V)250W (AC100-240V)Power ConsumptionStandby:<15W;
Full load:<200WStandby:<20W;
Full load:<250WLEDPower indicator light: PWR (green); network indicator: link/Act (yellow); POE work indicator: POE (green)Power SupplyBuilt in
AC:100~240V 50-60Hz 4.1ABuilt in
AC:100~240V 50-60Hz 4.1AOperation TEMP / Humidity-20°C~+55°C;5%~90% RH (Non condensing)Storage TEMP / Humidity-40°C~+75°C;5%~95% RH (Non condensing)Dimension(L*W*H)270*181*44.5mm330*204*44mmNet /Gross Weight<1.7kg / <2.2kg<2.3kg / <3kginstallation methoddesktop type ,wall mounted type,hanging typeAnti-surge / Protection LevelAnti-surge:4KV 8/20us;
Protection Level:IP30Certification3C
CE mark, commercial;CE/LVD EN60950;
FCC Part 15 Class B;ROHS;Warranty1 Year (2 Years for Power Supply), lifelong maintenance.
DIMENSION
APPLICATION
PACKING LISTPACKING LISTCONTENTQTYUNIT18-Port 10/100M &10/100/1000M PoE Switch(ONV-POE31016PL)1SETPower Cable1PCMounting Kits1SETUser Guide1PCWarranty Card1PCORDERING INFORMATIONModelDescriptionONV-POE31016PL16* 10/100M RJ45 port +2* 10/100/1000M uplink RJ45 port non management PoE switch, port 1-16 support IEEE 802.3af/at POEStandard, POE output total power is 200W, port 9-16 support long-distance 10M/ 250m transmission, with built-in power supply.ONV-POE31024PL24* 10/100M RJ45 port +2* 10/100/1000M uplink RJ45 port non management PoE switch, port 1-24 support IEEE 802.3af/at POEStandard, POE output total power is 250W, port 17-24 support long-distance 10M/ 250m transmission, with built-in power supply.