OLYMPIC STAR PRODUCT:1PH/3PH-3PH HIGH PERFORMANCE VARIABLE FREQUENCY AC DRIVE

OLYMPIC STAR PRODUCT:1PH/3PH-3PH HIGH PERFORMANCE VARIABLE FREQUENCY AC DRIVE(SY8000 SERIES 0.75KW-400KW AC DRIVE/VFD)
1. Various control modes and widely used
2. Automatically recognize the motor parameters
3. RS-485 communication inferface, standards, MODBUS protocol
4. PWM flexible energy braking, can quickly halt machine
5. The torque output will be 150% when the frequency is 0.5Hz.
5. More powerful when at low rate, More stable when at high rate.
6. Zero speed torque output
7. Super-silent running
8. Quick menu design
9. Simple PLC, inbuilt PID adjustment
10. Compact and legerity structure
11. Mate the customer design
12. Trip suppression & Stable running
13. High stability, strong anti-interference ability
14.25 protection functionsFunctions:1. Dual-DSP + MCU + IPM high performance, high reliability
2. Automatic identification of motor parameters, automatic temperature compansation
3. Start by excitation, speed up the rapid response to vector control
4. Speed control and torque control switching online
5. Zero-servo lock function
6. The frequency of carrier wave can be up to 16k, carry out a comprehensive silent running
7. Standard built-in RS485 port, matching TDS-PA01 adapter to support the fieldbus.
8. Built-in PG card, built-in brake unit belows 22KW LCD/LED optional keyboard.
Support for uploading and downloading parameters...Widely used in:
1. metallurgy
2. Chemical
3. Petroleum
4. Textile
5. Electric power
6. Building materials
7. Coal
8. Plastics
9. Printing and Dyeing
10. Cable
11. Washing
12. Water supply
13. Heating.Itemdescription
inputRated voltage, frequencySingle phase, 220V, 50Hz/60Hz; 3 phase, 380V, 50Hz/60HzAllowed fluctuationContinuous voltage fluctuation: within± 10%, instant voltage fluctuation: within -15%10%; voltage imbalance: < 3%; frequency fluctuation: within 5%.outputVoltageSingle phase, 220V & 3 phase, 380VOutput frequency0~600Hz.Overload capability150% rated current, 1 minutes; 180% rated current, 1 secondscontrol traitCommand input modeBy LCD keypad, by terminals, by PC through serial communication port.Control modeOpen loop vector control, V/F control.Speed setting methodBy keypad, by analog, by PC through serial communication portSpeed setting precisionDigital command± 0.01%(-10 +40)
analog command± 0.1%(25° C± 10)Speed setting resolutionDigital command: 0.01Hz; analog command: 0.1% of maximum frequencySpeed control accuracyOpen loop vector control: ± 0.5%; (25° C± 10)Speed regulation rangeOpen loop vector control: 1: 100Torque control responseOpen loop vector control: < 200ms.Start torqueOpen loop vector control: 150% of rated torque at 0.5Hz.Torque control accuracy± 5%Set reference voltage supply output1 port, +10V, 5mAControl voltage supply output24V, 100mAAnalogy input2 terninal, No. 4 terminal is use for voltage, No. 5 is used for voltage and current inputAnalog meter output
1 terminal, 0/4~20mA or 0~10V available for itDO frequency signal output1 port, high-frequency signal output(programmable)Collector open-loop outputOne terminalProgrammable relay outputcontactor capacity: 250V AC/3A or 30V DC/1ASerial communication portRS-485 connector RS485+, RS485-4 bits LED displaysetting frequency, output frequency, output voltage, output current, motor speed, output torque, switch value terminal, programming menu parameters and fault code.Five indication lampParameter unit, RUN/STOP status, special status, charging status.Protection functionProtection functionOver voltage, under voltage, current limitation, over current, overload of inverter, overload of motor, overheat, overvoltage stallout, load short circuit, phase fault.Protection degreeIP21Cooling modeForced air coolingenvirenmentAmbient termearture-10° C, +40° CTermperature2090% RH(no condensation)Storage termperature-20° C, + 60° CApplication areaindoor(no corrosive odor, dust)Installation areaAltitude is not more than 1000meter, no dust, no corrosive oder, no direct sunlight.Vibration
less than5.9m/ S 2