Optical Module Test Board Encoder Codeboard Cloud Editor

USER SPECIFICATION
SFP/QSFP/XFP 3-in-1 CodingBox
Product Introduction Figure 1: Device• Green_LED: Normal Power Supply Indicator
• Red_LED: Device Initialization Abnormal
• White_LED: Operation Status Indicator
• MicroUSB_Interface: USB Connection
• Digital tube: Number Display
• SFP_Transceiver: SFP Standard Interface
• XFP_Transceiver: XFP Standard Interface
• QSFP_Transceive: QSFP Standard Interface
• I2C interface:SCL, SDA and GND SignalDetail CodingBox, a efficient encoder device, is designed to reprogram the SFP/SFP+/SFP28/XFP/ QSFP/QSFP28/CSFP-OPTION1/CSFP-OPTION2 optical transceiver. After this, an optical transceiver can be adapted to different communication applications, like Cisco, H3C, Dell, Juniper, saving cost and time.
We design an external 3-plug I2C interface signals, SCL, SDA, GND, so users can customize and self-program I2C communication timing or monitor current I2C timing by connecting a real time oscilloscope to analyse timing issues.Features • SFP/SFP+/SFP28/XFP/QSFP+/QSFP28 code reprogramming
• 5V/0.9A power supply parameter
• Simple application environment only USB interface
• Support windows XP, windows 7, windows 10 system
• API manual for self-packaging commands
• Matching multi-function software, including reading and writing of subtables under universal address AO and A2, DOM function, meaning the return of diagnostic results based on MSA standards SFF-8472, low speed state or control signal as TX_Disable, RX_Los, TX_Fault, interpret the information of the coding area of the transceiver based on MSA.Application Figure 2: Application For plug and play, we design the CodingBox mounted on computer's USB port. You can use it by connecting a USB data cable between the CodingBox and your computer, conveniently. As shown in figure 2, up to 9 CodingBoxs can be mounted on one computer at a time, we name these as CodingBox1, CodingBox2, ...CodingBox9. Each can insert the type of transceiver that you want to operate. In the near future, efficient reprogramming of QSFP-4SFP cable could become reality.NOTE only one module can be operated at a time by CodingBox.
When the red indicator light, you should disconnect the CodingBox's USB power supply imme diately and send an Email to"support@sfpcodingbox.com"to Seek technical support and we will deal with it as soon as possible.Version
VersionDate Directions1.02018-05-14General function introduction, initial release1.12018-05-18Streamlined content1.22018-10-17Streamlined content
Manner of Packing