Ore Ball Mill for Grinding Copper, Gold, Manganese Ore

Ore Ball millOre ball millis used to separate and screening different ore minerals, separate ore tailing. It also be used for ore grinding, non-ferrous metal beneficiation, new-type building material producing.
According to the discharge method, the ball mill divided to dry-type mill and wet-type mill.
Ball mill in Zambia
After signing the contract, our engineers tested the sample, and finally recommended the best process.
Species: barite
Capacity: 500t/d
Process: two stages one close-circuit crushing, one stage one-circuit grinding and classification, one roughing-two scavenging-ten cleaning.
Ore Ball Mill Working Principle:
To use the mini Ball Mill, the material to be ground is loaded into the Neoprene barrel that contains grinding media. As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over aperiod of several hours. Obviously, the longer the small size Ball Mill runs, the smaller the powder will be. Ultimate particle size depends entirely on how hard the ground material is, and how long the Ball Mill runs. Our Small Ball Mill for sale have been being used to grind glass, make ceramic glaze, powder various chemicals, and make black powder.Ore Ball Mill Structure:
Ore Ball millis mainly consisting of feeding device, big gear, discharge device, cylinder, diaphragm plate, hollow shaft, liner, drive device and other components.
1. The feeding device is consisting of inlet chute and screw. There are liners in the inlet chute, which can extend the working life of the feeding device.
2. There is pre-gap on the inlet hallow shaft, that can reduce the tolerance which is made of temperature changes and installation mistake to ensure the gear mesh.
3. Inside the ball mill, different parts have different liner structure, which will greatly improve the grinding efficiency.
4.Dry-type ball milladopt sliding bearing, which is good of strength, ductility, antifriction, abrasion resistance, lubricity and thermal conductivity. It is able to meet the lubrication requirements of the hollow shaft. That is suitable for the environment of low speed and heavy load in metallurgical &ore dressing industry.
5.Wet-type ball milladopt roller bearing, reduce useless work consumption and easy to replace.
Ball Mill Specification:ModelSpeed (r/min)Max. weight of balls (t)Input size (mm)Output size (mm)power (kw)Capacity (t/h)Weight(t)Φ900x1800371.8≤150.075-0.89150.5-23.4Φ900x2100372.3≤150.075-0.418.50.4-23.9Φ900x3000353.85≤250.075-0.4301.1-2.57.78Φ1200x2400354.6≤250.075-0.4301.3-3.28.65Φ1200x2800355.4≤250.075-0.4371.5-3.710.02Φ1200x4500358.6≤250.075-0.4452.7-6.7914Φ1500x3000299≤250.047-0.4753.3-8.214.12Φ1500x35002910.5≤250.047-0.4753.3-8.515.64Φ1500x45002913.5≤250.047-0.4904.5-1220Φ1500x57002917≤250.047-0.41102.6-1421.5Φ1830x30002413.5≤250.047-0.41354-1528Φ1830x36002414≤250.047-0.41354-1529Φ1830x45002420≤250.047-0.41554-1932Φ1830x70002431.5≤250.047-0.42106-2236.5Φ2100x30002218≤250.047-0.42106.4-2840.79Φ2100x36002220≤250.047-0.42107-2842Φ2100x40002221.5≤250.047-0.42107.6-2843.45Φ2200x360021.725≤250.047-0.42455.2-3244Φ2200x700021.746≤250.047-0.438015-3863Φ2400x36002128≤250.047-0.43208-6047Φ2400x45002135≤250.047-0.43808.5-6070.5Φ2700x360020.740≤250.047-0.440012-8075.5Φ2700x450020.748≤250.047-0.443012-90102Φ3200x40001865≤250.047-0.480030-180137

Ore Ball Mill Spare Parts:
Ore Ball Mill Installation:
Ore Ball Mill FAQ:We are the professional mining machinery manufacturer in China.I need to ask you some details for sending you the more suitable quotation,
1.what is the raw material do you want to process?gold ore?copper ore?zinc or lead?
2.what is the capacity per hour do you need?5ton per hour?10 ton per hour? or30 ton per hour?
3.what is the raw material input size?
4.what is the output size of your product?
I hope you can tell me these details,i will give you the best quotation ASAP ,thanks.